WASD V3 User Manual

V3/V3B User Manual
The V3 keyboard features a DIP switch on the backside of the keyboard to enable or disable various
modes of function.
DIP Switch Settings
Unplug keyboard before changing DIP switch positions.
take effect.
Switch State
SW1 Off, SW2 Off
SW1 On, SW2 On
SW3 Off/On
SW4 Off/On
SW5 Off
SW5 On
SW6 Off
SW6 On
*Keyboard must be powered off to switch modes.
Version 0.9 Firmware
Function
Qwerty mode
Mac mode
Disabled until v1.0
Factory Reset
Fn Key Enabled
Fn Key Disabled
Pgm Key Disabled
Pgm Key Enabled
Plug keyboard back in for new settings to
Notes
Standard QWERTY Layout
Reverses Alt and OS Key positions
This action will revert all keyboard settings back to
factory defaults. Unplug keyboard and set SW4 On.
Plug in Keyboard. All indicator LED's will flash red for
20 seconds and then turn solid green which means
factory reset is complete.
When Fn Key is enabled, you can access the built in
multimedia and lighting control keys.
Default position of Fn is the Menu Key
Enable the Pgm Key to access keyboard
programming functions.
Default position of Pgm is the right Ctrl Key (R_Ctrl)