Subscribe to Our Youtube Channel
Summary of Contents for EcoQuest Ozone Blaster WA
- Page 1 Ozone Blaster WA 5000mg Ozone generator OWNER’S MANUAL Please read all of the information provided in this owner’s manual before operating your new Ozone generator. www.ecoquest.company (888)664-1812...
- Page 2 CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN ATTENTION CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVCE PERSONNEL. This “bolt of lightning” indicates that uninsulated material within your unit may cause an electrical shock.
- Page 3 Read ALL instructions carefully before using this product. CAUTION! In order to reduce the risk of leakage to damage the instrument or person, it is important that be properly grounded to avoid potential shock.
- Page 4 Notes: Please do not use in dusty, multi-vibration, direct sunlight, corrosive gas. Do not disassemble or modify the equipment, it is within high voltage equipment, Non-maintenance professional personnel shall not disassemble the device to avoid danger The ozone generator is designed to use in unoccupied spaces. Prohibited face of the humans and pets during working state Working:...
- Page 5 Model: Ozone Blaster WA Europe AC 220-240V/50-60Hz or Rated Voltage: USA/Japan AC 100-120V/50-60Hz Power Consumption: 100W Air Volume: Max 100CFM Supply gas Ambient Air Active Oxygen(on) ： 5000mg/h Sound Level(DB): 45 Db. Remote Control/Manual: 19~32ft. (6~10m) Silicone tube One meters...
- Page 6 (Front View) (Back View)
- Page 7 Name Function and operation instruction Standby mode: Machine turns on when press Power button, Ozone Generator start working Power at 1 grade; Power on mode: Ozone Generator turns off when press the Power button 1. Press TIMER, display 15 MIN 2.
- Page 8 Name LED display Machine Press POWER to indicate machine working working status status Press OZONE to indicate ozone working Ozone grade status, to display 1 to 6 ozone grade Countdown Display the countdown clock. display Timing Timing function is turned on. reminder Normal mode Press NORMAL to indicate Normal mode...
- Page 9 Name Function and operation instruction Standby mode: Machine turns on when press Power button, Ozone Generator start Power working at 1 grade; Power on mode: Ozone Generator turns off when press the Power button Increase the ozone output, it is “1-2-3-4-5- Ozone up 6”...
- Page 10 The Ozone generator is designed to use in unoccupied spaces. The unit has a timer that will enable it to run for a maximum duration of 2 hours and 15 Minutes. It will then shut the Ozone generator off. You should allow 40 minutes before returning to the treated area.
- Page 11 If you suspect a problem with your unit check the following: 1) Unit is plugged in properly. 2) It’s important that the Ozone Generator be properly grounded to avoid potential shock. 3) Fuse is installed properly and in good condition. To replace fuse, pull out the plastic fuse holder, remove old fuse and insert new fuse.
- Page 12 Important To extend the life, continuous power interval must be 30 seconds or more, please unplug the device if the device are not used for long-term. Also the device should be worked within the specified voltage range. User normal use of the product in accordance with the instruction manual, the failure of the warranty period, can be a free repair.
Need help?
Do you have a question about the Ozone Blaster WA and is the answer not in the manual?
Questions and answers