Advertisement
OPERATION INSTRUCTIONS FOR THE EQUALIZER® EQ2 REGISTER
With the use of any electrical appliance, it is important to observe all basic
precautions to minimize the risk associated with use, such as electrical shock, fire, or
injury to persons. Read these instructions before using your Equalizer® EQ2
NEVER EXPOSE YOUR EQUALIZER® EQ2 TO TEMPERATURES OVER
1. Follow the directions for Operation Settings.
2. Position the Equalizer® EQ2 over any 6" x 12" (or smaller)
register.
3. Plug the power cord into the nearest 110-120 Volt AC outlet..
In some instances, when wall mounting the Equalizer®, the lettering on the Control Panel
label will be upside down.
1a. Installing over an existing register grill (see figure 1)Using the template, mark the
screw hole positions and then install two #6 screws (not included) into the top frame of
the register grill. Leave 7/16" of the screw protruding.
Figure 1
1b. Installing over a register boot without a register grill (see figure 2 above).Using the
template, mark the screw hole positions and then install two #6 screws not (not included)
above the edge of the register boot (plastic expanding plugs may be needed). Leave 7/16"
of the screw protruding from the wall surface.
BOOSTER™
READ AND SAVE THESE INSTRUCTIONS
Register Booster™.
140°F (60°C)
INSTALLATION
FLOOR REGISTERS
WALL REGISTERS
Figure 2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Equalizer REGISTER BOOSTER EQ2
- Page 1 3. Plug the power cord into the nearest 110-120 Volt AC outlet.. WALL REGISTERS In some instances, when wall mounting the Equalizer®, the lettering on the Control Panel label will be upside down. 1a. Installing over an existing register grill (see figure 1)Using the template, mark the screw hole positions and then install two #6 screws (not included) into the top frame of the register grill.
- Page 2 Dust accumulation in the interior of the Equalizer® EQ2 may be removed by using the round brush attachment of your vacuum cleaner, or by attaching your vacuum cleaner hose to the blower side and blowing dust out.
- Page 3 Sensitivity Differential switch to the MAX position. IMPORTANT WARNINGS 1) Your Equalizer® EQ2 will be as warm as the air that is delivered from the register of your forced air furnace and/or cooling system. The maximum temperature for a register is 140° Fahrenheit or 60° Centigrade. Your Equalizer®...
- Page 4 SERVICEABLE PARTS INSIDE. Attempting to open the housing will expose you to dangerous electricity, may cause fire, and will void any and all warranty. 17) To reduce the risk of fire or electrical shock, do not use the Equalizer® with any solid state speed control device.
- Page 5 This warranty is given in lieu of all other warranties, guarantees, and conditions on manufacturer's part, and the manufacturer shall have no tortious or other liability in respect to this Equalizer® EQ2 Register Booster™.
Need help?
Do you have a question about the REGISTER BOOSTER EQ2 and is the answer not in the manual?
Questions and answers
Warranty register
The warranty for the Equalizer REGISTER BOOSTER EQ2 includes the following terms:
1. The manufacturer is only liable to repair or replace the unit, at their discretion.
2. A defective unit must be returned prepaid and with proof of purchase.
3. The warranty does not cover defects caused by alteration, abuse, accidental damage, unauthorized repair, or misuse.
4. This warranty replaces all other warranties, guarantees, and conditions from the manufacturer.
5. The manufacturer has no tort or other liability for the Equalizer REGISTER BOOSTER EQ2.
This answer is automatically generated