Tripp Lite DWM1327SP Owner's Manual page 9

Full motion flat screen wall mount

6. Hook the TV onto the Wall Mount

4mm

Using an assistant or mechanical lifting equipment, lift the display with attached VESA plate. Set the

VESA plate's upper thumbscrews over the top flange of wall plate arm. Make sure the VESA plate's

lower screws fit inside of the wall plate arm's lower holes.

· Position a level on the horizontal and vertical sides of the display and adjust as needed.

· Reattach the lower knobs to the VESA mount (removed in step 1). Using the supplied wrench, tighten all

upper- and lower-knobs.

14-04-242-93332C.indd 9

5/7/2014 5:01:24 PM

Table of Contents