Specifications: Introduction Specifications: Audex Bluetooth headset ADB-2383 portable hand-free device Compliance: Bluetooth v 1.2 with advanced Bluetooth wireless communication technology. Power class: class 2 Bluetooth V1.2 compliant. Supply faster connection speed and Frequency range: 2.4 2.48 GHz much more better tone. ADB 2383 power supplied by a single Sensitivity of microphone: <...
Page 3
® relationship between two Bluetooth devices is called “pairing” . ® Each Audex Bluetooth headset has a default passkey [1234], which is stored 6 seconds in its internal memory. Whether you need to input the passkey or not during ®...
User's Guide. Please refer to the user's manual displayed with the following information: “Audex-2383”. of the other device(s) for specific pairing method. 4. When asked by the device, enter the headset passkey and then confirm To complete pairing , you need to enter the correct passkey when required by the if necessary.
Page 5
Button function list when using with cell phones Multi-function button Volume Volume Status Press briefly Press briefly Press briefly Press and hold Press and hold Press and hold * Voice dial function Switch on (about must be supported by 6 second) enable cell phone.
Page 6
(a steady red light appears). Important information Troubleshooting (Note: Please read all this information before using the ADB-2383) 1. Check for any exceptions or rules, due to national/local 4. Pairing is unsuccessful ®...
Page 7
Important information Warning 8. RF frequency and energy may affect some electronic systems Changes or modifications to this unit not expressly in a motor vehicle. Please check with the manufacturer to approved by the party responsible for compliance ensure that the headset will not affect the electronic systems in the motor vehicle.
Need help?
Do you have a question about the ADB-2383 and is the answer not in the manual?
Questions and answers