Hints For The Best Result; Troubleshooting - Klarstein 10029742 Manual

EN
20

HINTS FOR THE BEST RESULT

• Fill the bag only to an extent that leaves it possible to place the bag opening in the
vacuum chamber without wrinkles or ripples.
• Make sure the bag is dry. If the bag or its content are moist or wet, this will affect the
vacuum performance negatively.
• Straighten the bag to remove as much air as possible from it - this will significantly
speed up the process.
• Do not vacuum package objects with sharp edges like fish bones or shells as these
might tear the bag
• Make sure there is no crack or deformation, or small particles resting on the foam
gaskets around the vacuum chamber. If so, please take it out and wash and dry it
thoroughly, or replace with a new one.
• During bag vacuum packaging process, small amounts of liquids, crumbs or food
particles can be inadvertently pull into the vacuum chamber, clogging the pump
and damaging your appliance. To avoid this, freeze moist and juicy foods first be-
fore sealing bags or place a folded paper towel near the inside top of the bag.
For powdery or fine-grained foods, avoid overfilling bags. You may also place a
coffee filter inside before vacuum packaging.
• Pre-freeze fruits and blanch vegetables before vacuum packaging for best results.
• The supplied bags are generally washable and reusable. Exceptions: Do not re-use
bags you used for raw mear, fish, greasy food before. Also, do not re-use bags
after using them in a microwave or for cooking.

TROUBLESHOOTING

Nothing happens when
I try to vacuum packa-
ge
Air is not completely /
not sufficiently removed
from the bag
• Please check the AC outlet, fuses and the power cord
for damages.
• Make sure the bag is placed into the vacuum chamber
correctly and does not blcok the air intake.
• Make sure the bag opening is completely placed into
the vacuum chamber, is clean and has no wrinkles to
it. Also, make sure the bag is completely intact.