Table of Contents
Advertisement
POP3 server/IMAP4 server: enter the IP
address or host name of the POP3 or IMAP4
server.
POP3 port/IMAP4 port: enter the POP3 or
IMAP4 port number.
Use SSL: activate the use of the SSL (Secured
Sockets Layer) protocol.
IMAP4 retrieving option: (IMAP4 protocol
only): set whether the phone retrieves only new
messages or all messages.
Retrieving option: set which part of e-mails
the phone retrieves from the server.
Keep in server: leave the copies of e-mails in
the server after retrieving.
My Address: set your e-mail address.
User name: enter the POP3 or IMAP4 user
name.
Password: enter the POP3 or IMAP4 password.
Use SMTP Authentication:
authentication, which requires the user to log in
before sending
e-mails.
Same as POP3/IMAP4: select if you want the
SMTP server to have the same parameters as the
POP3 or IMAP4 server.
User name: enter the SMTP user name.
Password: enter the SMTP password.
enable SMTP
Voice mail
(Menu 5. .4)
Use this menu to set the number of the voicemail
server.
You must store the voicemail server number
before accessing the server. Your service provider
can give you the number.
Push message
(Menu 5. .5)
You can determine whether or not your phone
receives push messages.
Broadcast
(Menu 5. .6)
You can change the settings for receiving CB
messages.
•
Receive: select to receive CB messages, or not.
•
Channel list: indicate the channels from which
you wish to receive CB messages. Please contact
your service provider for further details.
•
Language: select the preferred languages in
which CB messages display.
Memory status
(Menu 5. )
Use this menu to view the memory status for SMS,
MMS, e-mail, and push messages.
49
Advertisement
Table of Contents
