Table of Contents
Advertisement
Quick Links
1
MP7430 Lithium-Ion jump starter
INSTRUCTION MANUAL
Please keep these instructions safe for future reference
Micro-processor controlled 12000mAh lithium-ion vehicle jump starter with 2A 5V USB, 10A 12V, 3.5A 19V
and 12V jumpstart output.
Supplied with AC adaptor, 12V cigar accessory charger, selection of interchangeable barrel plugs, USB multi-
plug cable, smart jump start cable, an integral LED torch and carry case.
Suitable for use with all 12 V lead-acid batteries including deep cycle, AGM and Gel.
www.maypole.ltd.uk
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MayPole MP7430
Summary of Contents for MayPole MP7430
- Page 1 MP7430 Lithium-Ion jump starter INSTRUCTION MANUAL Please keep these instructions safe for future reference Micro-processor controlled 12000mAh lithium-ion vehicle jump starter with 2A 5V USB, 10A 12V, 3.5A 19V and 12V jumpstart output. Supplied with AC adaptor, 12V cigar accessory charger, selection of interchangeable barrel plugs, USB multi- plug cable, smart jump start cable, an integral LED torch and carry case.
- Page 2 This appliance is not for use by a person (including children) with reduced physical, sensory or medical capabilities or lack of experience or knowledge. PREPARATION OF THE BATTERY Refer to the vehicle manufacturer’s handbook for battery maintenance, connection and charging guidelines. www.maypole.ltd.uk...
- Page 3 When depressing the “ON/OFF” switch on the top of the unit, the blue LEDs adjacent will illuminate. The number of LEDs illuminated signifies the current level of charge within the device: i.e. two solid blue segments represents 50% completed charge. When charging is complete, all LED segments will switch off. www.maypole.ltd.uk...
- Page 4 The ability of the device to successfully start a vehicle is heavily dependent upon the condition of the primary vehicle battery; if the vehicle battery is very old, has been discharged for an extended period of time or otherwise damaged jump starting may not be successful. www.maypole.ltd.uk...
- Page 5 Connect the device you wish to be charged to the USB output port socket using an appropriate cable and depress the ON/OFF switch on the top of the unit. The blue battery status indicator LEDs on the face of the product will illuminate and charging will commence automatically. www.maypole.ltd.uk...
-
Page 6: Technical Specifications
How should this unit be disposed of at the end of its useful life? The unit contains hazardous constituents that should be disposed of at local authority registered waste recycling center or a battery collection point. www.maypole.ltd.uk... - Page 7 DECLARATION We declare that this product conforms to standards EN50498:2010, EN55015:2013, EN61547:2009, EN55022:2010, EN55024:2010+A1:2015 , EN61000-3-2:2014 , EN61000-3-3:2013 and ROHS Directive 2011/65/EU Technical Manager Maypole Ltd January 2018 sales@maypoleltd.co.uk www.maypoleltd.co.uk www.maypole.ltd.uk...
Need help?
Do you have a question about the MP7430 and is the answer not in the manual?
Questions and answers