Chord Type - Native Instruments M32 User Manual

Harm
If CHORDMode is set to Harm, the CHORDType menu allows you to specify the interval of notes
in the selected SCALEType that will constitute the chord: E.g., a triad in the form of the root note,
the third note, and the fifth note (CHORDType value 1-3-5).
The CHORD parameter Mode, set value Harm.
Chd Set
If CHORDMode is set to Chd Set, the CHORDType menu allows you to choose from a selection
of major and minor chords depending on the current Root Note.
The CHORD parameter Mode, set value Chd Set.
The SCALE Type and KEY MODE parameters are not available when CHORD
Mode is set to Chd Set.

12.8.2. CHORD Type

The second CHORD parameter is Type. On the keyboard, it is mapped to Knob 6 of the Control
section in Scale Edit mode. Use it to define a chord that will be generated from a single note used
as input.
The CHORD parameter Type.
The available CHORD Type values depend on whether CHORD Mode is set to Harm or Chd Set,
as described in detail below.
Smart Play – Playing and Editing Scales and Chords
95