Advertisement
CONNECTION
Connect to PC via Agility X 2.4GHz wireless dongle
a. Toggle power switch
to power on GameSir GM300 wireless gaming mouse.
b. Plug the Agility X 2.4GHz wireless dongle into the USB port of Windows PC.
c. GameSir GM300 wireless gaming mouse is ready to be used.
Connect to PC via Type-C cable
a. Plug both ends of Type-C cable into the USB ports of GameSir GM300 wireless
gaming mouse and PC.
b. GameSir GM300 wireless gaming mouse is ready to be used.
* Please wait for the automatic installation of the driver on PC at the first use.
* When GameSir GM300 wireless gaming mouse is under wired connection, it will be
charged automatically.
GAMESIR GM300 G-CORE DRIVER
You can customize your favorite lighting effects in light tabs of GameSir GM300 G-Core
to create a personalized appearance. In addition, various sophisticated parameters can
be adjusted in GameSir GM300 G-Core, including but not limited to macro, DPI, etc., to
create your exclusive device.
BASIC LIGHTING EFFECTS
Colorful Streaming: Select the duration
The LED spectrum cycles between 16.8 million colors
indefinitely.
Steady: Select the color and brightness
Monochrome effect, the LED will remain lit in the selected
color.
Breathing: Select the color and duration
Breathing effect, LED light fades in and out of 16.8 million
colors.
POWER INSTRUCTION
When GameSir GM300 wireless gaming mouse is in low power condition (15% and
below), the LED LOGO light will flash in red 3 times every 15 seconds.
When GameSir GM300 wireless gaming mouse is in low power condition (5% and
below), it will automatically shut down for power preserve.
When GameSir GM300 wireless gaming mouse is under wired connection, it will
disconnect from 2.4GHz wireless mode and be charged automatically.
Charging time: 1.5~2 hours
Recommended charging voltage: 5V/1A
Advertisement
