Bcsoft; Configuration, Master-Slave Procedure; Addressing - Honeywell BCU 370 Technical Information

Function

3 .4 .2 BCSoft

The Windows software BCSoft allows extended access
to individual statistics, protocol functions, line record-
ers and the parameterization of the burner control unit
via an optical interface. Unit parameters which are not
relevant to safety can be set and adjusted to the spe-
cific application.

3 .4 .3 Configuration, master-slave procedure

PROFIBUS DP is structured as a master-slave system.
This allows mono-master or multi-master systems to be
implemented.
A distinction is made between three device types:
– DP Master Class 1 (DPM1)
DPM1 devices are central controllers which exchange
data with the distributed stations (slaves) on the ba-
sis of a defined cycle. This includes, for instance, the
PLC, PC, CNC or VME systems with which the PROFI-
BUS DP is operated.
– DP Master Class 2 (DPM2)
DPM2 devices are programming, project planning or
operator-control devices. They are used for configu-
ration and commissioning of the system or for system
operation and visualization in ongoing operation.
BCU 370 · Edition 01.19
– DP slaves
The devices which transmit input information from
the periphery to the master and which issue output
information from the master to the periphery are re-
ferred to as "slaves".
This also includes the BCU..B1.

3 .4 .4 Addressing

A maximum of 126 units (masters and slaves) can be
connected to a PROFIBUS DP system. Each subscriber
is assigned an individual PROFIBUS address which can
be set between 0 and 126 using two code switches on
the BCU..B1 board.
33