Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 3
Confidential !!! Spec Spec Bluetooth : Power Source: § § Bluetooth v2.0 compliant or above. Rechargeable Battery - 3.7V / 155mA(max.) / Removable Li-Polymer Battery Radio: § Battery Charging: Carrier Frequency: 2.4~2.480GHz Charge via Express Socket Directly (3.3V) Spread Spectrum: Charging Hours: 90% within 70mins, Full Charge §...
Page 4
Confidential !!! Knowing your Cardphone2 Knowing your Cardphone2 Pick Up/Toggle to BT Audio BT Pairing/ Headset ó Speaker Volume Up/Previous Page Mic. Mute Power/Hang Up/ Toggle to System Audio Volume Down/Next Page...
Page 5
Turn on the power of CardPhone2 w Enable pair-linking § Install VCM w VCM is a middleware used to manage Cardphone2 and control IM application. § Function keys w Keys on Cardphone2 provide with different functions depending on the state it...
Page 6
Power on (Hang Up Button) a. To turn on your CardPhone2, press “Hang Up” button for a while. You can also turn it off by pressing “Hang Up” button for at least 2 seconds. b. CardPhone2 will be turned on with amber LED blinking.