2 Getting Started
Installing the Battery
1.
Installing the UIM Card
If the phone is powered on, press and hold
After removing the battery, you can install the user identity
module (UIM) card.
Charging the Battery
To charge the battery, do as follows:
1. Connect the charger to the charger connector.
2. Connect the charger to a power socket.
During the charging,
the screen and is in an animated status.
If
becomes static, the battery is fully charged.
3. Disconnect the charger from the power socket when
becomes static.
4. Press the gray buttons on both sides of the charger connector
inward to disconnect it from the phone.
6
2.
1.
appears on the upper right corner of
3.
to power it off.
2.