Summary of Contents for Vesture TrackVac 500
- Page 1 TrackVac™ Robotic Vacuum Cleaner Model No. 500 Vesture Corporation USER MANUAL 120 E. Pritchard Street Asheboro, NC 27203 Phone 336-629-3000 www.vesture.com www.trackvac.com...
-
Page 2: Table Of Contents
Table of Contents TrackVac™ Safety Precautions TrackVac™ Before using this product, please read the following safety instructions and keep this operation Safety Precautions manual for future reference. Safety Instructions Battery and Recharging Before using this product, please follow all normal safety precautions to avoid the occurrence of situations such as fire, short-circuit, and injury. -
Page 3: Battery And Recharging
Battery and Recharging TrackVac™ Special Features (cont.) TrackVac™ 4. "MODE"button on the remote control allows you to select a specific cleaning pattern for the 1. When using rechargeable batteries, please use the correct voltage and current listed on the TrackVac™. By default the unit operate in Automatic Mode (switches between all 5 patterns), but product. -
Page 4: Main Unit And Accessories
Main Unit and Accessories TrackVac™ Parts of the Main Unit TrackVac™ No. Description TrackVac™ Main Unit RF Remote Control Filter Rechargeable Battery Pit Road Charger User Manual... -
Page 5: Control Panel
Control Panel TrackVac™ Remote Control Functions TrackVac™ 1. Turn on the power switch, and the power light will light up green and make "Gentlemen, start your FORWARD RIGHT engine" sound. In order to protect battery, the TrackVac™ will make 5 audible beeps every 30 minutes to alert the users to Turn off the power switch when not in use. -
Page 6: Battery Installation And Removal
Battery Installation and Removal TrackVac™ Parts of the Charging Station TrackVac™ 1. Make sure that the power of the unit is turned 'OFF'. 2. Use your fingers to depress the two tabs on the battery cover. Lift the battery cover by these tabs as shown in Illustration 1. -
Page 7: Recharging The Battery
Recharging the Battery TrackVac™ Recharging the Battery TrackVac™ NOTES: The battery needs 2.5 hours to recharge before use. • If the Fuel/Battery light on the control panel blinks red, the battery must be immediately charged. 1. First, make sure that the power switch on the unit is set to 'Off', and make sure the battery is properly installed. -
Page 8: Installing Basic Accessories
Installing Basic Accessories TrackVac™ General Operation TrackVac™ Side Brush Installation and Removal Preparing for use • To install the Side Brush, place the Phillips head screw through the center hole of the Side Brush 1. Make sure you have completely charged the unit for 2.5 hours before using it. assembly, and align the screw with the hole in the slot for the Side Brush. -
Page 9: Stopping Operation
General Operation TrackVac™ Cleaning Dust Bin and Air Filter TrackVac™ Stopping Operation 1. Make sure the power to the unit is 'Off'. 1. Press the Stop button on the remote control. 2. Pick the unit up off the ground with the built in handle located on the top of the unit. The unit will 2. -
Page 10: Cleaning The Dust Bin And Air Filter
Cleaning Dust Bin and Air Filter TrackVac™ Cleaning the Vacuum Entry TrackVac™ After operating the machine for a period of time, dust and dirt will accumulate on the vacuum entry on the bottom of the TrackVac™. Cleaning this area regularly will help ensure that the unit performs properly. -
Page 11: Specification
Suction ......1 brush sweep and vacuum at www.vesture.com or you may call us at 336-629-3000 to get these items.
Need help?
Do you have a question about the TrackVac 500 and is the answer not in the manual?
Questions and answers