Table of Contents
Advertisement
SMIL Editor
Use this menu to create a new SMIL file, which is a
combination of an image, text, and a sound clip.
Creating a new SMIL file
1. Select New SMIL.
2. Highlight Add New SLIDE and press <Edit>.
3. When the image line is selected, press <Edit>.
4. Select the source image category you want.
5. Select the image you want.
6. Move to the text line and press <Edit>.
7. Enter a message and press <Ok>.
8. Move to the audio line and press <Edit>.
9. Select the source sound category you want.
10. Select a sound clip.
11. Press <OK>.
12. To add more slides, repeat steps 2 to 11.
You can add up to 5 slides for an SMIL file.
13. When you have finished, press <OK> to save the
SMIL file.
Using SMIL slide options
You can access the following options by pressing
<Menu> on the image, text, or audio line on a slide:
•
Set Start: set the time delay before the currently
selected item displays when you open the slide.
•
Set End: set the length of time the currently
selected item will be displayed before the next
item automatically displays.
•
Layout: view the layout for your SMIL slide.
•
Preview: view the SMIL file you have created.
•
Delete Image/Delete Text/Delete Audio:
delete the added image, text, or sound.
While you are viewing a slide list, press <Menu> to
access the following options:
•
SLIDE During: set how long one slide of the
received message displays on the message
presentation screen. After a specified time, the
display automatically scrolls to the next slide.
•
SLIDE Move: move the selected slide to the
position you want.
•
SLIDE Delete: delete the selected slide.
35
Advertisement
Table of Contents
