Tadao YAKUZA OLED Series Manual

1. Features

2. Installation

3. Board Operation
4. OLED Diagrams
5. Menu System
6. Settings
7. Recommendations
•
Fully functional in the Planet Eclipse Ego 06
•
Yakuza Series OLED graphical display system shows eye status, battery life, current fire mode and max
rate of fire, game timer, and menu system
•
Advanced microcontroller running at 16 Mhz
•
Fully legal in the NPPL, PSP, and Millennium tournament series
•
Anti-breech bounce software to reduce chopping when a loader is running out of paintballs
•
RF socket and wiring harness included to support Magna, Pulse, and other RF transmitters
•
Multiple modes of fire: unlimited semi-automatic, adjustable semi-automatic, PSP ramping, PSP 3-round
burst, NXL full-automatic, Millennium, custom ramping, auto-response, 3-round burst, and full-automatic
•
Tadao trigger logic asynchronously monitors the trigger switch, using an interrupt based scan at 4 million
times per second for the quickest response time and fastest semi-automatic
•
Tadao dynamic eye logic watches for the bolt to return every shot, cycling the marker as fast as possible
•
Rate of fire adjustable from 10 to 30 bps, plus unlimited rate of fire, and a 0.5 ms fine-tuning setting
•
Adjustable ABS programming eliminates first shot drop-off
•
AMB (anti-mechanical bounce) and CPF (cycle percentage filter) algorithms help to prevent mechanical
and switch bounce without missing real trigger pulls
•
G-mode setting allows 3 different breakout options for every fire mode
•
More than 1 billion unique ways to adjust settings
•
Extremely easy to use graphical and text based menu system, which allows changes to nearly any variable,
including debounce, dwell, loader delay, AMB, anti-bolt stick, fire mode, max rate of fire, fine rate of fire
adjustment, eye mode, CPF, g-mode breakout, ramp start, ramp percentage, screen settings, settings
profiles, and more
•
All settings are stored in non-volatile memory so they are not lost when the battery is disconnected
•
Power-efficient software and hardware lengthen battery life
•
Automatic 20-minute idle power down saves batteries
•
One-touch startup enables the marker to fire almost instantly
•
Uses spring battery contacts so there's no wiring harness to break or wear out
•
80 gram trigger microswitch
•
Lifetime warranty against manufacturing defects
•
Free Yakuza software updates
Installation of the Yakuza board must be carefully done to avoid damaging the electronics or wiring harnesses.
1. Remove the grip panel from the right side of the grip frame, exposing the battery and circuit board.
2. Remove the battery and unplug the eye and solenoid harnesses.
3. Remove the 3 mounting screws.
4. Gently pull the stock board out of the frame.
5. Make sure to keep track of the 3 switch contacts.
6. Insert the Yakuza board into the grip frame.
7. Replace the 3 mounting screws, making sure the three switches sit snugly against the rear of the frame.
8. Plug the eye and solenoid harness back into the appropriate sockets.
YAKUZA OLED SERIES
Ego 6 Board
FEATURES
INSTALLATION