Orion Flex Quick Start Manual

Thank You for Purchasing an Orion Flex Stretch Wrapper!
Your new FLEX stretchwrapper was designed to get up and running quickly upon
delivery. This guide will help you begin using your machine effectively by providing step
by step instructions in the basic operations of the machine. More advanced capabilities
are described in the manual. For your convenience, there is an
interactive on-screen troubleshooting guide under the Diagnostics
screen. You can download the complete manual, electrical prints,
and mechanical drawings at this location:
http://www.orionpackaging.com/landing/flex-manual-download/
Unpacking

Remove skidding/ packaging materials.

Please inspect the machine for any fasteners that may have loosened in
shipping. Although this is highly unlikely, long delivery distances may have an
effect on fastener torque.

Inspect for any obvious shipping damage and report to your machine provider.
(HPA, HPD, LPA, LPD) Carriage Obstacle Detect Error
Recovery

When the obstacle detect error occurs, the brake must be released.

To release the brake, pull outward on the carriage strap on the front side of the
tower until the brake releases.

Align the limit switch on the inside of the tower with the center of the strap.
http://www.orionpackaging.com/landing/flex-manual-download/
Quick Start Guide
Orion Packaging Systems * A division of Pro Mach
4750 County Road 13 NE Alexandria, MN 56308
(800) 333-6556
Page 1 of 9
Bulletin #: V012116-01
Issue Date: January 21, 2015