Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for adapt GR29
- Page 1 Wireless Bluetooth GPS Receiver User’s Manual...
-
Page 2: Table Of Contents
Contents Disciption Product Features 2. Specification 2.1 Spec 2.2 Positioning Accuracy 2.3 Acquisition time 2.4 input & output 2.5 Power support 2.6 Dynamic condition 2.7 Dimension, Weight 2.8 Other function 3. LED indcator 4. Package contents 5. User guide 5.1. Charging 5.2. Power on 4.3 Driver and Test software page 2... -
Page 3: Disciption
Discription The GR29 is a Bluetooth GPS Receiver that can be used independently. Not only does it can transfer data with PDA, or Notebook via Bluetooth, but also it can transfer data through USB cable with those devices without Bluetooth. It is compact, stylish, and portable, even can be wore on the key chain, integrated the rechargeable polymer Lithium-ion battery made the product sensitivity while low power consumer. There are 3 LEDs indicate the Bluetooth, GPS information, and battery information respectively, enable the running status monitored clearly. Product Features Compact size that even key chain portable. High sensitivity, powerful GPS chipset, fast acquisition for 16-channel. Built-in WASS/EGNOS Demodulator. Built-in USB driver, that can transfer data via normal USB cable; Support Bluetooth SPP profile. Support NMEA0183 v2.3, 9600bps. Built-in stable, high performance polymer lithium ion battery, low power consumer for at least 8 hours operation. page 3... -
Page 4: Specification
Specification 2.1 Spec Frequency:1575.42MHz Channel: acquisition and track up to 16 satellites signal Receiver: L1, C/A code Update rate: 1Hz Minimum signal tracked: -158dBm 2.2 Positioning Accuracy: 2.5m CEP accuracy <2m CEP accuracy (DGPS, WAAS or EGNOS) Velocity: 0.1meter/sec 2.3 Acquisition time: Hot start: 4 sec. Warm start: 34 sec. Cold start: 42 sec. 2.4 Input & output: Bluetooth protocol: Serial Port Profile CSR BC04, 2.0 Baud rate: 9600bps Distance: More than 10 meters (no obstacle) USB driver full speed USB 2.0 (USB1.0/1.1 Compatible) NMEA0183 v2.3 2.5 Power support: Input:4.7~5.2V Built-in polymer Lithium-ion battery with capacity of 520mA/h for at least 8 hours operation page 4... -
Page 5: Dynamic Condition
2.6 Dynamic condition Altitude: 18,000 meter max. Velocity: 515meter/sec. max. Acceleration: 4G max. Jerk: 20meter/sec. 2.7 Dimension, Weight Dimension: 65 (L) ×28 (W) ×15 (H) mm Weight: 30g Operation Temperature: -10˚C - +60˚C Store Temperature: -20˚C - +60˚C Operation humidity: 5% to 95% no condensing 2.8 Other function Switch: Mechanical slide switcher Antenna: Built-in GPS antenna LED Function: Bluetooth, GPS positioning, Battery status GPS Power USB Port Bluetooth Ring indicator (up to down) switcher page 5... -
Page 6: Led Indcator
LED indicator Status Color Indicator Information Searching bluetooth device Blink Blue interval 1/sec Waiting for data transferring 1/sec Connected and start to transfer data Red On Low power Green On Charging N/A Off Working Positioning GPS Yellow Positioned Power switch a. Power on: Yellow LED and blue LED on. b. Power off: Yellow LED and blue LED off. USB Port Mini USB 5 Pins female connector. -
Page 7: Package Contents
Package contents • One GR29 Bluetooth receiver • One set Mini Car Charger • One Mini USB cable • One driver CD • One user manual User Guide 1. Charging t’s recommended to charge the battery for the first using. When the battery is full, the power LED will be off. It also can be charged with car charger or USB cable. 2. Power on 2.1 Switch on, yellow LED and blue LED on, GPS start to positioning; when it got the position, the yellow LED will start to blink. 2.2 Data transferring via bluetooth: Blue LED on indicates it’s searching Bluetooth device. The ID of this product is ‘SCBT’, it’s not necessary to match it with other device, if password required, please type ‘0000’. After it is connected, the blue LED blink with interval of 1 time/sec indicates data transferring. 2.3 Data transferring via USB: The product will be allocated to a port number automatically when connected to the computer (please install the driver first), which used to communicate with the computer. 3. Driver and Test software The driver and test software are placed on the attached CD. For the details please see the Readme.txt. page7... - Page 8 page8...
- Page 9 www.adapt-mobile.com...