Abe CS8096 User Manual

CS8096 / Abe
CS8096
User Manual
Bluetooth
User Manual
Headset pictures..............................................................................................................1
Charging the battery.........................................................................................................1
Turning on the Headset....................................................................................................1
Turning off the Headset....................................................................................................1
Putting Headset in Pairing Mode......................................................................................2
Establishing Bluetooth Link..............................................................................................2
Answering incoming calls.................................................................................................2
Transferring calls..............................................................................................................2
Muting the microphone.....................................................................................................2
Ending calls.....................................................................................................................3
To make a new call using voice dialing.............................................................................3
Redialing last dialed number............................................................................................3
Rejecting incoming call.....................................................................................................3
Adjusting speaker volume................................................................................................3
Ear Hook orientation........................................................................................................3
Bend the ear hook to fit your ear.......................................................................................4
Putting way.......................................................................................................................4
Low-battery indication......................................................................................................4
Charging and recharging the battery.................................................................................4
Charging Connection Diagrams....................................................................................5
Voice Over Internet Protocol (VoIP) Application..............................................................5
FCC Interference Statement...........................................................................................6
/ ( )
On Off S1
Volume Down S3
DC Socket
Volume Up (S2)
!
Charging the battery
Thank you for buying new CS8096
important to charge the battery for 12 hours.
!
Turning on the Headset
While the Headset ( HS ) is powered down, press and hold S1 for 2 seconds. A low
tone followed by a high tone will indicate that the HS is powered up. Green LED will
turn on for 1 second. Afterward, green LED will flash every 3 seconds.
!
Turning off the Headset
While the HS is powered up, press and hold S1 for 3 seconds. A high tone followed
by a low tone will indicate that the HS is powered down. And the LED will keep on
Red until S1 is released.
®
Headset
Ear hook
( )
Speaker
Lock
LED
Microphone
Bluetooth Headset. Before first time use, it is
1
!
Putting Headset in Pairing Mode
Make sure the HS is fully charged and charging cable disconnected from it before
pairing starts. While the HS is powered off, press and hold S1 for 8 seconds. Red
and Green LEDs flashing alternately will indicate that the HS is in Pairing Mode.
Follow the operating instructions for your
pairing process. Typically, this has to be done by going to a setup or connect
menu and then selecting the options to discover
may take several seconds to establish a connection.
Your phone's display should indicate that it has found the "CS8096" headset and
asks if you want to pair it. You should confirm this. The phone's display would
prompt you for a passkey or PIN. Enter a sequence of "0000".
The headset LED will flash Green every 3 seconds, indicating successful pairing.
Usually the phone will also ask whether you want to change the headset's name.
We recommend you should approve the CS8096 name and not change it. You
can pair as many headsets and devices as you wish in your mobile phone.
If pairing does not occur as expected. Turn the headset and phone off and wait for
10 seconds. Turn the headset and phone on again and repeat all steps from
beginning.
! Bluetooth
Establishing Link
After pairing, the mobile phone will show "connect", then please select "YES" to
.
establish the link Now you are ready to make and answer calls on the HS. For
other phones, please follow the operation manual to establish the link.
!
Answering Incoming Calls
When an incoming call is present, the HS will ring . Pressing S1 will answer the
call. The green LED will continue to flash fast while the call is in session. (Once
every second)
!
Transferring Calls (For Nokia 3650 or equivalent models)
When you are in session, calls can be transferred from the
HS and from the HS to the Bluetooth
To transfer a call from the Bluetooth
be transferred to the HS.
To transfer a call from HS to the
instructions of your phone.
!
Muting the microphone
To mute the microphone during an active call
Pressing both S2 and S3 buttons simultaneously for about a second, the
microphone will be muted. A periodic beep tone will be heard while the mute
function is active.
To end the mute function
When the microphone is muted, press on both S2 and S3 buttons simultaneously
will end the mute function and the periodic beep tone will stop.
!
Ending Calls
While a call is in session on the Headset, pressing S1 will disconnect the call.
After the call is disconnected, the green LED will flash normally.
!
To make a new call using voice dialing
When using a Bluetooth mobile phone:
1.Make sure the voice dialing function is probably set up in the Mobile phone and
it is within the range of the HS. Press S1 on the HS shortly.
2.After the beep tone on the HS, make a voice dial as you normally would by
saying the name of the person on the HS. The call will be connected in a few
seconds.
When using a mobile phone without Bluetooth built-in and requiring a Bluetooth
dongle:
1.Make sure the voice dialing function is probably set up in the mobile phone and
it is within the range of the HS. Press S1 on the HS shortly.
2.After the beep tone on the mobile phone, make a voice dial as you normally
would and the call will be connected in a few seconds.
!
Redialing last dialed number (Support handsfree profile mobile only. For Nokia
3650, Siemens S55, or equivalent models)
To redial the last dialed number, press and hold S3 for 2 seconds. short low tones
will indicate an attempt to redial.
!
Rejecting incoming call (Support handsfree profile mobile only.
3650, Siemens S55, or equivalent models)
When there is an incoming call and you want to reject it, press the buttons S1 and
hold it until you hear a long beep tone, then release it.
!
Adjusting Speaker Volume
While a call is in session, pressing and releasing S2 will increase the speaker
volume; pressing and releasing S3 will decrease the speaker volume on the HS.
There is a key tone to indicate volume increase or decrease.
warning tone will be heard when the volume level reaches its maximum or
minimum.
! Ear Hook orientation
If you want to change the orientation of ear hook, please follow the following steps.
1) Detach the ear hook from the phone
2) Select the orientation you want (left or right), and attach the ear hook and lock it
Bluetooth mobile phone to start the
Bluetooth devices. Bluetooth
Bluetooth phone to the
phone.
phone to the HS: press S1 once, the call will
Bluetooth phone, please follow the operating
2
For Nokia
However, a
3