Advertisement
Introduction
The RJS Model TP140A printer is intended to be used to provide a hard copy printout for the Inspector line of
portable bar code verifiers.
Components
Printer
Roll of thermal report paper
AC Adapter
Verifier interface cable
Setup
1. Install the thermal report paper in the printer (see below)
2. Connect the verifier interface cable between the printer and the bar code verifier
3. Connect the power supply to the printer and plug the power supply into the wall outlet
4. Turn on the printer (switch on the back of the printer)
5. The printer is now ready to operate with the verifier
Install Thermal Report Paper
Support
Contact RJS for verifier/printer support
Phone: 855-746-8034 (763-746-8034)
Website:
www.rjs1.com
Email:
support@rjs1.com
Address:
RJS Technologies, Inc.
701 Decatur Ave N, Suite 107
Minneapolis, MN 55427 USA
002-8072 C
TP140A 05/24/2012
Page 1
TP140A PRINTER
USER'S GUIDE
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for RJS TP140A
- Page 1 TP140A PRINTER USER’S GUIDE Introduction The RJS Model TP140A printer is intended to be used to provide a hard copy printout for the Inspector line of portable bar code verifiers. Components Printer Roll of thermal report paper AC Adapter ...
- Page 2 Warranty General Warranty RJS warrants the TP140A to be free of defects in material and workmanship for a period of 1 year, under normal use and service, from the date of shipment from the RJS factory. The liability of RJS under this warranty is limited to repairing or replacing the defective part and/or unit. RJS may optionally choose to issue a credit for any unit returned during the warranty period.
Need help?
Do you have a question about the TP140A and is the answer not in the manual?
Questions and answers