Table of Contents
Advertisement
TROUBLE SHOOTINGS
1.
Ensure that the Bluetooth feature (A2DP and AVRCP) is activated on your devices.
2.
If speakers are disconnected and/or speakers are not in pairing mode, you will hear warning 'beep' sound. Then please turn off your
speakers and try to re-connect with your compatible device.
3.
If the volume is on the maximum or minimum level, you will hear 3 beep sounds.
4.
When the volume is on the maximum level, audio quality may not be the best according to the sound source. Then, please make the
volume level down until you can hear the optimum quality of the sound.
5.
Please always use the master and slave speakers "together" and make them charged enough when not in use.
6.
The communication range between master and slave speakers is within 3 meters under the optimal condition for enjoying the stereo
sound.
7.
Check that the master speaker is within 10 meters (30 feet) from your bluetooth device to be paired and that there are no obstructions
between the master and slave speakers and between the speakers and the bluetooth device, such as walls or other electronic devices.
7
Advertisement
Table of Contents
