Table of Contents
Advertisement
Quick Links
User Manual
MediGenix Upper Arm Automatic
Digital Blood Pressure Monitor
MGX-1209
Time/Date Setting
Memory Check and Memory Deletion
ever better
0197
EC
REP
ESH
Safety Notice
1
Thank you for purchasing the MediGenix MGX-1209 Automatic Blood Pressure
Monitor. The monitor unit has been manufactured using reliable circuitry and
02
durable materials. Used properly, this blood pressure monitor will provide years
of satisfactory service.
04
07
The MediGenix BP Monitor is intended for non-invasive measuring of an adult's
systolic and diastolic blood pressure and pulse using the oscillometric method.
08
The unit is designed for home or clinic use. Measurement position is on an adult's
upper arm only. All values are shown on one LCD display.
09
Please read this User Manual before using the unit and retain it for future
09
reference. Avoid risk and damage by following all warning precautions.
10
Please consult your doctor for specific information about your blood pressure.
11
12
14
15
16
17
19
20
22
0197
24
ESH
EC
REP
Document No. DBP-1404-002Z
The product is in compliance with the requirements of
MDD93/42/EEC
"0197" is the identification number of the Notified Body
Manufactured for Syringa UK Ltd
Unit G Daux Road, Billingshurst, RH14 9SR United Kingdom
By Hangzhou Sejoy Electronics & Instruments Co Ltd, Building 2,
No 202 Zhenzhong Rd, West Lake Economy & Technology Zone,
310030 Hangzhou, P.R.C.
European Authorized Representative: Shanghai International
Holding Corp. GmbH (Hamburg) Eiffestrasse 80, 20537 Hamburg,
GERMANY
Clinically Validated by the European Society of Hypertension
Warning Signs and Symbols Used
Caution
Mandatory
Prohibited
Type B Equipment
Consult Instructions for Use
Serial Number
Discard the unit according to local recycling requirements
The unit conforms to the requirements of the EC Directive
MDD (93/42/EEC) on medical devices
Manufacturer
European Society of Hypertension
Authorised Representative in the European Community
Version: V.Z.
Date of Issue: 2018.02.25
2
Advertisement
Table of Contents
Summary of Contents for MediGenix MGX-1209
-
Page 1: Safety Notice
Unit Illustration Important Testing Guidelines The MediGenix BP Monitor is intended for non-invasive measuring of an adult’s systolic and diastolic blood pressure and pulse using the oscillometric method. Quick Start The unit is designed for home or clinic use. Measurement position is on an adult’s upper arm only. - Page 2 Dispose of the batteries correctly observing local laws and regulatons. Unit Illustration Unit Illustration Contents Arm Cuff ever better User Manual MediGenix Upper Arm Automatic Digital Blood Pressure Monitor MGX-1209 Air Plug Air Tube Arm Cuff 1. Monitor Unit 2. User Manual...
-
Page 3: Important Testing Guidelines
Important Testing Guidelines Quick Start 1. Avoid eating, exercising or bathing 30 minutes before testing. 1. Install batteries (see Figure A). 2. Insert the cuff air plug into the left side of the monitor unit (see Figure B). 2. Relax in a calm environment for 5 minutes before testing. 3. -
Page 4: Memory Groups
Unit Operation Unit Operation Applying the Arm Cuff Testing 1. Firmly insert the air plug into the opening located on the left side of the 1. Power On: monitor unit. Press and hold “START/STOP” button until a beep sounds. The LCD screen will appear for one second as the unit performs a quick diagnosis. -
Page 5: Testing
Unit Operation Unit Operation Memory Check Troubleshooting With power off, press and hold the “MEM” button to turn the unit on. The LCD will display the last measurement memory as NO:1 reading. Older test results in the memory can be viewed by pressing the “MEM” button repeatedly. Solution Problem Possible Cause... -
Page 6: Maintenance
Cleaning the cuff: Do not soak the cuff in water! Apply a small amount of Model MGX-1209 rubbing alcohol to a soft cloth to clean the cuff’s surface. Use a damp cloth (water-based) to wipe clean afterwards. Allow the cuff to dry naturally at Display LCD Digital Display Size: 62.7 x 46.4mm (2.47”... -
Page 7: Specifications
Warranty Specifications The MediGenix MGX-1209 Automatic Digital Blood Pressure Monitor complies with The MediGenix MGX-1209 Automatic Digital Blood Pressure Monitor is covered the European regulations and bears the CE mark “CE 0197”. This blood pressure by a 1 year product warranty from date of purchase. If the unit does not function...
Need help?
Do you have a question about the MGX-1209 and is the answer not in the manual?
Questions and answers