Halo Smart Contents General ............................3 Safety notices .........................3 Product registration ....................3 Description of the unit ...................4 Installation ..........................6 Connectivity principle ....................8 Sensors sensitivity settings ................19 Replacing the filters and the Pre-filter..........20 Recommendations for storing and using the filters ....................21...
In order to benefit from Erlab extension of warranty offer, the following conditions shall be respected: Warranty applicability is subject to the respect of the Erlab’ general terms and conditions of sale and following requirements: • The registration and/or the connection of the product shall be performed within the twelve months from the purchase date;...
Halo Smart Description of the unit Above view Below view 592 mm 23’’5/16 Network and power ports 892 mm 35’’ 1/8 4 Attachment points Side view 98 mm 3’’15/16 260 mm 205 mm 10’’1/4 8’’1/16 108 mm 4’’1/4...
Page 5
User Manual Specifications Processed 220 m3/h air flow Operating modes 24/7, Night/Day, Alert Halo unit monitors the air flow and informs the user through light pulsation Fan monitoring communication Pre filtration Particulate prefilter Chemplus Acids Formaldehyde Sensors Semiconductor of a wide array of Electro-chemical sensor Electro-chemical Semiconductor for VOCs...
Halo Smart Installation Minimum protective equipment • One-piece overall + overshoes + bouffant cap • Gloves • Protective glasses According to the local regulations Fix the unit into the hard or drop ceiling trought its 4 attachment points. Ceiling Air outlets must be outside the hard or drop ceiling...
Page 7
User Manual Connect the power supply and the RJ45 socket to your network It is recommended to install a switch between the electrical cable and the electrical outlet...
Halo Smart Connectivity principle Ecosystem designed for simpler use and safer protection Embedded Embedded Embedded Embedded service service service service Fume hood Storage cabinet Air purifiers Air quality sensors Ethernet-TCP-IP Internet network and/or local area network (LAN - for eGuard PC only)
Page 9
Monitoring + Controlling Monitoring Monitoring + Controlling Data access One unit Multiple units Multiple units Historical data access Historical data download Alerts, Notifications Multiple units monitoring Multiple user accounts Automatized status report (except if local connection) Download available on www.erlab.com...
Page 10
You enter the « Status » page and you can have access to the « Settings » using the following credentials: Apply the following procedure Login : erlab / Password : smart Please go to page 15...
Page 11
User Manual Page is not accessible Modify computer network parameters Network parameters Left click Right click...
Page 12
Halo Smart Access to the Network and sharing center Left click Access to the network connection N.B : This confirms your WIFI is Right click disconnected! Left click to access properties...
Page 13
User Manual Enter compatible network parameters as indicated below Left click Left click...
Page 14
Open your web browser again, type again the following IP address 192.168.0.200 and validate OK : You are connected to the embedded software • You enter the « Status » page and you can have access to the « Settings » using the following credentials: Login: erlab / Password : smart...
Page 15
User Manual Administrator interface Status page details Choose active interface page Device ID: Model Device ID: serial number, MAC address, device status Activates smart light to identify the unit location Air quality gauge: indicates the air quality level (green: good air quality/Red: polluted air) Indicates fan status ON/OFF: Turn ON/OFF fan Unit usage time since since its first usage...
Page 16
Halo Smart Access to the settings with the following login credentials: User name: erlab Password: smart...
Page 17
User Manual Settings details Device time and date settings Device network settings Mode: Selected IP protocol Hostname: Device name on network IP: IP address of the device MASK: network mask GW: Network gateway Activate/Deactivate the exchange of information This allows the transmission of information from the device to the eGuard server for: - remote monitoring via eGuard App (mobile &PC) - receiving usage reports Halo operation modes...
Page 18
Halo Smart Log page details Displays the device’s event log Used for downloading the log in .csv format...
Halo Smart Replacing the filters and the Pre-filter Replacing the carbon filter Filter 12 Kg 26.5 lbs * US model does not have thumb screws New filter * US model does not have thumb screws Pre-filter replacement New pre-filter...
We recommend replacing the filter annually (if used 24/7). Failing that and/or in the absence of information regarding device usage: ERLAB is unable to provide any guidance as to the predicted service life of the filter(s). In such cases, we strongly recommend: •...
Page 22
We provide safety, we protect your health Erlab invented the ductless fume hood in 1968. With more than 45 years of experience in the field of chemical filtration and protection of laboratory personnel; we know the formula for safety. With Erlab, you will never have to wonder or worry if our products are safe.
Need help?
Do you have a question about the Halo Smart and is the answer not in the manual?
Questions and answers