Advertisement
Quick Links
Advertisement
Summary of Contents for Sornbeo BH1521
- Page 1 Sports Bluetooth Headphone BH1521 instruction manual...
-
Page 2: Safety Information
Safety Information Note:Please read the following information before using Electronic equipments To avoid the side effects of electronic interference,turn off the headphone in the place where there is clear marks to ban the using of electronic products. Civil aviation Turn off the headphone after boarding the plane and prohibit using the headphone during the flight to avoid the interference to civil aviation communication system. - Page 3 Packaging 1. Manual 2. Wireless Bluetooth headphone 3. Micro USB charging cable Before using the products,please read the following instructions carefully and preserve for recording.
- Page 4 Fitting Instruction...
-
Page 5: Specification
32Ω sensibility:-42±3dB Frequency Response: 20Hz-20000Hz Micro Phone: Microphone Unit: Φ4*1.5mm Sensitivity: -42 ± 3dB Impedance:≤2.2K Frequency Response:30-16000HZ Bluetooth Mode: Bluetooth Version: CSR 4.0 Receiver range:10M Carrier frequency: 2402MHz - 2480MHz SNR: -90dBm transmitted power: classII I(-6dBm~+4dBm) Pairing name: BH1521... - Page 6 “pairing”,turn on the Bluetooth function on the phone and search new devices,then paring the “BH1521” on the list,the blue and red lights will stop crossing flashing,only flashing with blue light after successful paring. ※If stop pressing before cross flashing of blue and red light,it will enter into the status of power on,it needs to turn off the headsets to re-operation.
-
Page 7: Operation
the first phone. b.After shutting down the headsets,reboot the headsets until the blue and red LED lights cross flashing(long press the multifunctional button for 5 seconds),enter into the status of paring again. c.Turn on the Bluetooth of the second phone and search the new device,connect the headsets follow the usual operation. - Page 8 The LED displays and relative prompt sound under kinds of condition: ●Power on: The blue light will shine for one second ●Power off: The red light will shine for 1 second ●Pairing: The blue light and red light will shine alternately ●Standby(no connecting with the Bluetooth): The blue light will shine every 2 seconds ●Standby(connecting with Bluetooth): The blue light will shine...
- Page 9 FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the BH1521 and is the answer not in the manual?
Questions and answers