ACTUATOR TO VALVE MOUNTING INSTRUCTIONS
89 SERIES VALVES
Assemble Valve to Actuator
IMPORTANT! Note the red OPEN/
SHUT indicator mounted on top of
the actuator shaft and the position
of the ball in the valve. The actua-
tor should be mounted such that
the red indicator is in-line with the
valve body when the ball is in the
open position, or across the valve
body when the ball is in the closed
position.
1. Rotate the valve stem so that it
is in the corresponding closed or
open position with regards to the
actuator. The drive key on the
valve should be perpendicular to
valve body when valve is open and
parallel when in the closed posi-
tion.
2. Place the actuator, with the
bracket attached, atop the valve
so that the 12 point socket en-
gages the stem nut, the shaft
notch engages the drive-key and
locator screws straddle the valve
body hex (see Figure 4).
3. Install two socket head cap
screws to secure valve to mount-
ing bracket.
(continued)
Figure 4