Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Atexbeam PL-AT800
- Page 1 BEAM i s r 70207/EN...
-
Page 2: Table Of Contents
INDEX ATEXBEAM PL-AT800 Description Features and Benefits Enhanced Performance and Safety Features Getting started with Operating Instructions Operating Status Indications Maintenance Product Specifications In the package PRECAUTIONS AND WARNINGS WARRANTY... -
Page 3: Atexbeam Pl-At800 Description
II 2D Ex ib IIIC T150°C ATEXBEAM Description ATEXBEAM safety lamp is built with a high power LED and is fit by a light-weight, highly compact and high capacity Lithium Ion battery. The enclosure of the lamp is made of industrial Polycarbonate resin with excellent impact strength. -
Page 4: Features And Benefits
ATEXBEAM PL-AT800 Features and Benefits Lighting time span: Up to 9 hours lighting time in high power mode and up to 20 hours in power saving mode Equipped with light-weight wide thermal range and high capacity Li-ion battery and it is capable... -
Page 5: Enhanced Performance And Safety Features
ATEXBEAM PL-AT800 Enhanced Performance and Safety Features Power Saving Mode The power saving feature is to reduce battery power consumption in order to maximise lighting time span. power Pressing the switch twice from off position to saving activate power saving function (Dim mode) that outputs less light than the normal light (On mode). -
Page 6: Getting Started With Operating Instructions
Getting Started with Operating Instructions Charging ATEXBEAM PL-AT800 Instruction: Charging ATEXBEAM PL-AT800 must be carried out with the designated charging station and only in areas away from potential explosive atmosphere. Plug the universal power adaptor into a 110Vac (US) or 230Vac (Europe) power outlet. - Page 7 Lamp Operating Instructions: ATEXBEAM PL-AT800 is operated with one soft silicon power switch located on the back of the lamp. By pressing the switch, switching sequence cycles through three lighting modes as shown below: Press the switch once: Light is on in Full Brightness...
-
Page 8: Operating Status Indications
The battery is being charged. Blinking LEDs indicate battery capacity level. 3) All LEDs ON (1st, 2nd, 3rd LEDs) : The battery is fully charged The LED Indication Of ATEXBEAM PL-AT800 Lamp: LED Flashes (LED above the power switch shows the function Battery capacity low,... -
Page 9: Maintenance
BEAM PL-AT800 Maintenance: Built-in battery is factory charged up to 30% in capacity when you buy ATEXBEAM PL-AT800 lamp. Keeping the lamp charged over continuous period of time, i.e. overnight, does not damage the battery or the lamp itself. - Page 10 Electronic Module Replacement Step 1: ove six rubber pads from the body cover step C Step 2: step 2 step 2 Remove six screws and then the body cover Step 3: Pull out the electronic module and unplug the connections of step A / B / C step A step B...
-
Page 11: Product Specifications
Product Specifications Product Model BEAM PL-AT800 TÜV 16 ATEX 7864 X II 2G Ex ib IIC T4 Gb Approval II 2D Ex ib IIIC T150°C Db Equipment Category on Type ib intrinsic safety Zone 1, 2 / Gas Group IIC Classifi... -
Page 12: In The Package
In the package PL-AT800 ATEXBEAM LAMP CHARGING STATION UNIVERSAL POWER ADAPTOR USER MANUAL DECLARATION OF CONFORMITY... -
Page 13: Precautions And Warnings
ONLY USE MANUFACTURER’S APPORVED BATTERY PACK FOR REPLACEMENT WARRANTY When ATEXBEAM lamp PL-AT800 is used under normal conditions and according to instructions in the user guide, the lamp is under warranty for 3 years period against manufacturing defect. The warranty period for battery and main lighting LED is 12 months from date of purchase.
Need help?
Do you have a question about the PL-AT800 and is the answer not in the manual?
Questions and answers