Advertisement
Advertisement
Table of Contents
Summary of Contents for NHR WZB-01USB
- Page 1 Nietzsche Enterprise CO,LTD. WZB-01USB ZigBee USB DONGLE User Manual...
- Page 2 Content Introduction 01-02 Specification Applications Network Overview Hardware Overview WZB-01USBC ZigBee-Dongle Getting start 04-07 Install USB dongle driver Setting USB dongle configuration 04-05 Computer COM Port setting Make Network Link & LED indication Accessories CD Quickview Data Software User Manual Safety notice Please read and follow the instructions before use of this product.
-
Page 3: Introduction
Wireless ZigBee Dongle, for ModBus, General Applications WZB-01USBDC Wireless ZigBee Dongle, for DIO Applications Introduction WZB-01USB series ZigBee USB Dongle features as a coordinator; easy to link and connect to the Host computer, provides fully compliant wireless ZigBee communications with routers/end device,... -
Page 4: Introduction
● Home/ Building automation Network Overview Network topology ZigBee Network Topology Models Star Mesh ZigBee coordinator(ZC) Full Funcation Device(FFD,Router) Reduced Function Device(RFD) Network application Controller WZB-D03 MD End device WZB-01USB dongle for Modbus/DIO protrol RS485 RS485 ETHERNET Internet WZB-02485 Coordingator End device Router... -
Page 5: Hardware Overview
Hardware Overview WZB-01USBC ZigBee-Dongle Link button Reset / Add / Remove Antenna Wireless data transmission to PC USB socket LED Light For indication link status... -
Page 6: Getting Start
Getting start Install USB dongle driver To install the PL-2303 USB Driver From the CD enclosed... -
Page 7: Getting Start
Getting start COM Port setting The WZB-01USBC ZigBee dongle must be plugged into the PC. Go to My Computer, click right button on the mouse, select Content, choose Hardware, click Device Manager, then set COM port. (Prolific USB-to-Serial Comm Port) as below. COM port setting items Setting Baud rate... -
Page 8: Make Network Link & Led Indication
Getting start Make Network Link & LED indication Function Operation LED Indicator Blue LED blinking flash, 30 seconds allowed for join Join to network Dongle Press “S1” once turn to intermittent flash means well linked Blue LED blinking flashes, 30 seconds allowed to Remove the Dongle Press “S1”...
Need help?
Do you have a question about the WZB-01USB and is the answer not in the manual?
Questions and answers