Page 1
QUICK START GUIDE 4000 Series 4-in-1 MULTI-FUNCTION TESTERS M odels: 4320, 4 52 0 SAFETY CHECKLIST Survey the test station. Make sure it is safe & orderly. Always keep unqualifi ed/unauthorized personnel away from the test area. Familiarize yourself with safety protocols in the event of a problem.
Page 2
4320 4520 4520 Turn the power switch ON. Upon power up, you will see the SCI company name, model number, and the current software version briefl y appear on the display. After this, you will see the default test parameters.
If you wish to have multiple test setups, you will need to begin by choosing a Memory return to the Perform Test screen. Location for each test. The 4000 Series has 6 memory locations available, each of which contains 6 steps.
Page 4
Edit Test Parameters Press the SET key a third Press the SET key from Press the SET key again to EDITING TEST PARAMETERS EDITING TEST PARAMETERS EDITING TEST PARAMETERS time until the test types the Perform Test screen confirm the memory step EDITING TEST PARAMETERS EDITING TEST PARAMETERS appear.
Conducting a Test WARNING: DO NOT TOUCH THE DEVICE UNDER TEST ONCE YOU START THE TEST. Adapter Box Connections To increase operator safety, you may elect to use an adapter box for products terminating in either a two-prong or three-prong line cord. If using an adapter box, follow these instructions to safely connect a DUT.
Page 6
Conducting a Test WARNING: DO NOT TOUCH THE DEVICE UNDER TEST ONCE YOU START THE TEST. DUT Connection If you elect to use test leads, follow these instructions to safely connect a DUT. Hook the black return lead (P/N 99-10238-01) into the RETURN terminal located on the front panel.
Page 7
Conduct A Test WARNING: DO NOT TOUCH THE DEVICE UNDER TEST ONCE YOU START THE TEST. Connect the Interlock Disable Key (P/N 99-10040-01) to the Signal Input connector on the rear panel of the tester. If you’re not utilizing a DUT enclosure (P/N 99-10715-01) or other safety device, the Interlock Disable Key is required in order to run a test.