Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Russell Hobbs Turbo Vac Pro RHSV1601
Summary of Contents for Russell Hobbs Turbo Vac Pro RHSV1601
- Page 1 Turbo Vac Pro 16V 2 in 1 Cordless Cleaner Model Number: RHSV1601 For Customer Services & Spare Parts please call 0345 209 7461 Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm Or visit us at www.productcare.co.uk PLEASE RETAIN FOR FUTURE REFERENCE...
-
Page 2: Table Of Contents
CONTENTS Page(s) Safety instructions Turbo Vac feature diagram Turbo Vac assembly Charging your Turbo Vac Using your Turbo Vac 11-13 Cleaning and care 14-15 Problem solving Guarantee and customer services Spare parts Disposal information Thank you for purchasing your Turbo Vac Pro 16V 2 in 1 Cordless Cleaner. To get the best from your new cleaner, take a few moments to read these instructions and keep them in a safe place for future reference. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: • It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to electrical parts. - Page 4 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: • Do not attempt to use the charger with any other product nor attempt to charge this product with another charger • Do not abuse the charger cord; never carry the charger or base by the cord or pull cord to disconnect from an outlet;...
- Page 5 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: • Children should be supervised to ensure they don’t play with the appliance. • Use only as described and for the uses described in this manual • Do not use the charger if power cord or plug has been damaged.
- Page 6 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE • Do not attempt to empty dust container while unit is running, always turn off the appliance and unplug before emptying/replacing the dust container. • Turn off sweeper before clearing debris from floor brush assembly •...
-
Page 7: Turbo Vac Feature Diagram
TURBO VAC FEATURE DIAGRAM Main unit power button Dust container release Charging stand Handle Vac unit frame Brush tool Handle release button Floor head Crevice tool Handheld vac release Filter Charging cable button Handheld vac handle Filter cup Handheld power Dust container button/charging indicator For Customer Services &... -
Page 8: Turbo Vac Assembly
TURBO VAC ASSEMBLY Before using your cleaner Remove all packaging and lay out the separate components. Check the unit after unpacking for any visual damage such as: • Misaligned or damaged parts • Damage to the main body and separate components •... -
Page 9: Turbo Vac Assembly
TURBO VAC ASSEMBLY Ensure the power is switched off before assembling. 1. Insert the assembled handheld vacuum unit into the main frame as shown on the diagram - suction inlet first then securing the handle into place. 2. Align the bottom of the frame with the connectors on the ball joint of the floor head, lowering the frame until it ‘clicks’... -
Page 10: Charging Your Turbo Vac
CHARGING YOUR TURBO VAC Before using for the first time you will need to charge the cleaner. 1. First, assemble the charging stand. Before charging ensure the cleaner is switched off. 2. Plug the charging cable into the adaptor socket on the back of the charger dock and insert the plug into a suitable 13 Amp mains socket, pressing the switch on. -
Page 11: Using Your Turbo Vac
USING YOUR TURBO VAC Once assembled and charged: 1. Lift the cleaner off the charging dock and place on the floor. 2. Support the floor head with your foot and pull back the handle 3. Press the main unit power button to start the power. 4. - Page 12 USING YOUR TURBO VAC - HANDHELD 1. To convert from full sized vac to handheld cleaner, make sure the unit is stood in the upright position and press in the handheld vac release button. Ensure you are holding the handheld unit handle so that it can be pulled out safely.
- Page 13 USING YOUR TURBO VAC Emptying the dust container When the dust container reaches the MAX fill line indicated on the side of the product, it will need to be emptied. This will help it to maintain suction performance. 1. To remove the dust container, press the release button located just above where the container is attached.
-
Page 14: Cleaning And Care
CLEANING AND CARE: CLEANING THE FILTER It is necessary to clean the filters regularly with frequent use in order to maintain suction performance and prolong the life span of your cleaner. 1. Follow steps 1 to 3 on the previous page. 2. -
Page 15: Cleaning And Care
CLEANING AND CARE Before you clean the appliance, make sure the power is switched off and that the unit is not on the charging stand. It is recommended to store the appliance on the charging stand. Do not leave plugged in for extended periods of time. You can fold the handle by pressing in the handle release button and folding backwards. -
Page 16: Problem Solving
PROBLEM SOLVING PROBLEM POSSIBLE PROBLEM POSSIBLE SOLUTION The cleaner hasn’t had Make sure you have plugged in the cleaner to charge for 3 enough charge hours. The light will flash when charging. The cleaner won’t Charging cable is Make sure there is no signs of damage to the charging turn on damaged cable. -
Page 17: Guarantee And Customer Services
GUARANTEE AND CUSTOMER SERVICES At Russell Hobbs, we take all our customer feedback seriously. Feel free to contact our Product Care Team, on 0345 209 7461 Monday – Friday: 8am-8pm & Saturday: 9am – 1pm, who will be more than happy to assist you. -
Page 18: Spare Parts
SPARE PARTS To check the availability of the following spare parts, simply contact our friendly Customer Services team using the details provided at the bottom of this page. Filter Charging cable For Customer Services & Spare Parts please call 0345 209 7461 Opening times: Monday - Friday 8am –... - Page 19 NOTES...
- Page 20 Model: RHSV1601 Made by G2S Ltd under license. G2S Limited, Wigan, WN2 4AY Russell Hobbs is the registered trademark of Spectrum Brands (U.K.) Ltd. This symbol is known as the 'Crossed-out wheelie bin Symbol'. When this symbol is marked on a product/batteries, it means that the product/batteries should not be disposed of with your general household waste.
Need help?
Do you have a question about the Turbo Vac Pro RHSV1601 and is the answer not in the manual?
Questions and answers