Advertisement
Quick Links
Advertisement
Summary of Contents for bike-energy LS14
- Page 1 Operating information bike & car universal charging station for electric vehicles...
-
Page 2: Table Of Contents
Index 1. Introduction 2. Safety instructions 3. Manufacturer 4. Specifications 4.1 Power supply 4.2 Body 4.3 Protection class 4.4 Temperature range 4.5 E-bike charging system 4.6 E-car charging system 5. Quality certificates 5.1 CE evidence of conformity 5.2 TÜV 5.3 Quality guarantee 5.3.1 Safety for batteries 5.3.2 Safety for user and operator 6. -
Page 3: Safety Instructions
Electrical Engineering Order. This document contains important information, which acquaint you with the assembling, power connection, operation and maintenance, as well as with the safe and proper handling of the bike-energy charging station. To avoid malfunctions, read the operating manual carefully before you start with the installation and start-up. -
Page 4: Manufacturer
Ennspark 2 5541 Altenmarkt Austria Tel.: +43 / (0) 6452 / 5253-0 Fax.: +43/ (0) 6452 / 5253-40 e-mail: info@stranger.at web: www.stranger.at , www.bike-energy.com UID number: ATU 35215708 HFU-DG number: 700830720 4. Specifications 4.1 Power supply type power supply wire cross-section... -
Page 5: Protection Class
III safety extra low-voltage for RoPD plug-in systems for e-bikes, I protection class for safety socket and type 2 car charging-system 4.4 Temperature range bike-energy systems are designed for an ambient temperature between -20°C and +50°C 4.5 E-bike charging system Charging electronics – programmable U-I Source, with energy bus preparation, CAN open bus capable and RS485 interface. -
Page 6: Tüv
(see pt.6 High-tech charging) If e-bikes are exclusively charged at bike-energy charging stations, the battery service life is prolonged by 100 %. (see fig. 1 of pt. 6 battery-university) 5.3.2 Safety for user and operator - bike-energy charging stations guarantee safe charging outdoor. - Page 7 This protects the battery at the maximum bike-energy charges the battery only up to 90 %. As a result, the service life of the battery is twice as long. bike-energy bike-energy protects the battery and prolongs the service life!
-
Page 8: Installation And Electrical Connection
4. Insertion of the connecting cable into the provided nozzles M25 or M32. 5. Cable relief and connecting 3 by an electrician. 6. For closing the case cover, tighten the screws evenly. 7. Hang the bike-energy body from above to the installation plate. -
Page 9: Power Supply
(by station operator) – wait for 5 sec – switch on again. Docking system: RoPD System-C, suitable for all bike-energy charging cables (adapter). The docking system is part of a modern safety magnetic coupling: Instead of using a plug, the cable is simply docked –... -
Page 10: Circuit Diagrams
charging cable plugged in vehicle recognized / full... vehicle recognized charging vehicle charging vehicle charges with up to 22 kW battery charged vehicle recognized / full charging completed The maximum charging capacity can be preset at the selector switch of the charge controller 'preset-charge-current' 4 by an authorized electrician. -
Page 12: Conformity Declaration
10. Conformity declaration EC-conformity declaration 2014 The manufacturer: Stranger Elektrotechnik Ennspark 2 5541 Altenmarkt Austria Tel.: +43 / (0) 6452 / 5253-0 Fax.: +43/ (0) 6452 / 5253-40 e-mail: info@stranger.at web: www.office@bike-energy.com declares hereby, that the following products:... - Page 13 Product description: bike (&car) -energy, charging station for e-vehicles, in particular e- bikes, Pedelecs and e-cars Type designation: bike-energy LS14, LP21, LP22, LPC2, LB21, LB23, LBC2 Build year: 2014 Specifications AC: 230 V/ 400V 50 Hz, 13 A-33A, preliminary fuse depending on type, see manual Specifications DC:...
Need help?
Do you have a question about the LS14 and is the answer not in the manual?
Questions and answers