1. Manuals
  2. Brands
  3. Spotwave Wireless Manuals
  4. Antenna
  5. SpotCell 100
  6. User manual

Spotwave Wireless SpotCell 100 User Manual

Hide thumbs Also See for SpotCell 100:
Table of Contents

Advertisement

Quick Links

Download this manual
Technical Support
The SpotCell 100 serial number must be available to authorize technical
support and/or to establish a return authorization for defective units.
The serial number is located on the back of the SCU and DDU as well
as the box in which they were delivered. Additional support information
may be obtained by accessing the SpotwaveWireless Inc. website at
www.spotwave.com. To contact support by telephone, call your local
Cellular provider, or 1-877-610-9586.
Important Safety Information
Warning! For your safety, beware of power lines and ensure appropriate
safety measures are maintained at all times during the installation of the
SpotCell equipment. If equipment not shipped with the SpotCell
system is to be used during installation or mounting, follow all
equipment manufacture's instructions in proper use to ensure injury is
avoided.
This manual outlines installation instructions and the appendix offers
practical safety tips (see page # entitled 'safety'.
If you are not sure about a safe installation, do not attempt to install it
yourself. Call a professional installer for help.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SpotCell 100 and is the answer not in the manual?

Questions and answers

Related Manuals for Spotwave Wireless SpotCell 100

Summary of Contents for Spotwave Wireless SpotCell 100

  • Page 1 Technical Support The SpotCell 100 serial number must be available to authorize technical support and/or to establish a return authorization for defective units. The serial number is located on the back of the SCU and DDU as well as the box in which they were delivered. Additional support information may be obtained by accessing the SpotwaveWireless Inc.
  • Page 2 LIMITED WARRANTY AND LIMITATION OF LIABILITY: 1. What is Covered and for How Long? Spotwave Wireless Inc. ("Spotwave") warrants to the original Purchaser that the Spotwave SpotCell System (the "System") is free from defects in material and workmanship under normal use and service for a period of 12 months from the date of shipment from Spotwave (the "Limited Warranty Period").
  • Page 3 Any terms and conditions of any purchase order or other instrument issued by Purchaser which are in addition to or inconsistent with the terms and conditions of this letter of agreement shall not be binding and shall not apply, even if accepted by Spotwave. SpotCell 100, Release 1.0...
  • Page 4 SpotCell 100, Release 1.0...

  • Page 5: Table Of Contents

    Getting Started ......... 3 Packing list - SpotCell 100 ......3 Unpacking and inspecting.
  • Page 6 Grounding ......... 35 SpotCell 100, Release 1.0...

  • Page 7: Introduction

    Installation of the SpotCell 100 does not require any specialized technical knowledge in the area of Cellular or RF technologies. The SpotCell 100 can be installed by any person(s) with the ability to use a screwdriver, and in some situations may require the use of a ladder and/or drill, and/or minimal use of additional related tools.
  • Page 8 NTRODUCTION The SpotCell 100 system receives signals from one or more celluar base stations and re-transmits the signal to areas where cell phones do not work or work poor ly due to obstructions or the remoteness of the location. Figure 1.1:How SpotCell 100 improves cellular communications...

  • Page 9: Getting Started

    2 – Getting Started 2.1 Packing list - SpotCell 100 The SpotCell 100 is shipped in a single box containing: Directional Donor Unit (DDU) - this is the outward facing part of the assembly. Subscriber Coverage Unit (SCU) - this is the indoor part of the assembly.

  • Page 10: Unpacking And Inspecting

    Remove all packing material from the Directional Donor Unit (DDU) and the Subscriber Coverage Unit (SCU). Save the packaging in case the SpotCell 100 is ever stored or shipped to SpotWave for service. Check the contents of the package to make sure you have received everything ordered and verify that the mounting kit contains all the listed parts.

  • Page 11: Preparing For Installation

    SpotCell 100. 2.3.5 Signal Strength The SpotCell 100 system brings signals from an area of adequate coverage, to an area with poor or non-existent coverage. It is the DDU which captures a good signal, and the SCU that provides the signal to the area with poor cell phone coverage.

  • Page 12: Orientation Of Ddu Relative To Scu

    2.3.11 Barrier between DDU and SCU The greater the physical obstruction between the DDU and SCU, the better the performance. Dense obstructions such as brick, concrete or metal walls are better than wooden or plaster walls. SpotCell 100, Release 1.0...

  • Page 13: Installation

    Note: It may not be possible to install the DDU indoors when installing the SpotCell 100 in remote areas. An effort should be made to install the DDU outdoors when installing in a remote location. Spotwave Wireless Inc.
  • Page 14 Insert wires here Depress tab here TO BE UPDATED Figure 3.1:Inserting wires in SCU to supply power Plug the power supply adapter into a wall socket Ensure the switch on the SCU is in the ‘Install’ position. SpotCell 100, Release 1.0...
  • Page 15 Again, rotate the DDU left to right, this time stopping your rotation when the LED is green. This is the direction the DDU should be mounted. In some tall buildings, it may be neccessary to tilt the DDU down to get a good signal (green LED). Spotwave Wireless Inc.
  • Page 16 DDU is receiving (see figure below). Mount the DDU in the location that has the highest indicated signal level. TO BE UPDATED Figure 3.4:Displayed Signal Strength Proceed to page # for mounting instructions once the DDU location has been optimized. SpotCell 100, Release 1.0...

  • Page 17: Installing The Ddu On A Roof

    (identified by no text) into the negative (-) side of the connector. Release the tab to secure the power supply wires. Insert wires here Depress tab here TO BE UPDATED Figure 3.5:Inserting wires in SCU to supply power Spotwave Wireless Inc.
  • Page 18 The DDU should be mounted facing the direction the DDU was pointed for the longest period of time the LED was green during its rotation. Proceed to page # for mounting instructions once the DDU location has been optimized. SpotCell 100, Release 1.0...

  • Page 19: Installing The Ddu On An External Wall

    (identified by no text) into the negative (-) side of the connector. Release the tab to secure the power supply wires. Insert wires here Depress tab here TO BE UPDATED Figure 3.7:Inserting wires in SCU to supply power Spotwave Wireless Inc.
  • Page 20 DDU is receiving; mount the DDU in the location that has the highest indicated signal level. TO BE UPDATED Figure 3.8:Displayed Signal Strength Proceed to page # for mounting instructions once the DDU location has been optimized. SpotCell 100, Release 1.0...

  • Page 21: Choosing A Location For The Spotcell 100 Scu (Indoor Unit)

    3.2 Choosing a location for the SpotCell 100 SCU (indoor unit) The SCU should be optimized and mounted, after the DDU has been optimized and mounted. Generally, the SCU should be mounted in a location as far as possible from the DDU, while being within the area to have improved coverage.
  • Page 22 (see figure # below showing bars being displayed). In the event the number of bars is not changing, which is very possible, choose a location that is most convenient. TO BE UPDATED Figure 3.10:Displayed Signal Strength Refer to page # for mounting instructions. SpotCell 100, Release 1.0...

  • Page 23: Mounting

    The DDU has two brackets which can be used for mounting the unit. Figure 4.1:Mounting brackets Bracket #2 is optional, and is only be used when mounting the DDU with the face tilting left, right or down. The following illustration illustrate the the various mounting options. Figure 4.2:Mounting options Spotwave Wireless Inc.

  • Page 24: Mounting To A Wood Structure

    Install the two 1/4 x 2 inch lag bolts (item ##) , leaving the heads protruding enough that the bracket can be slipped over top. Hook the bracket over the screws and tighten in the position required. SpotCell 100, Release 1.0...

  • Page 25: Pipe Mount

    Two stainless steel hose clamps are required for mounting the DDU on pipe. Feed the clamps through the bracket attached to the back of the DDU and tighten. Figure 4.4:Pipe mounting the DDU Point the unit as required and tighten the clamps Spotwave Wireless Inc.

  • Page 26: Mounting The Scu

    (of which 10 are supplied) if anchors are required. 4.2.3 Grounding: Ensure there is a connection to earth ground. Use an appropriate conductor connected from the stud on the DDU to earth ground Figure 4.7:Grounding the DDU SpotCell 100, Release 1.0...
  • Page 27 Spotwave Wireless Inc.
  • Page 28 OUNTING SpotCell 100, Release 1.0...

  • Page 29: Displayed Information

    DDU is optimally positioned in this location. 5.2 SCU The SCU displays system stays and signal strength. The following table shows the various messages displayed and if neccessay, what action should be taken. Table goes here Table 1: SCU Display States SpotCell 100, Release 1.0...
  • Page 30 ISPLAYED NFORMATION SpotCell 100, Release 1.0...

  • Page 31: Trouble Shooting Information

    If the LED is still not illuminating, contact technical support. Status: My cell phone does not work around the location I would like to install the SpotCell 100 DDU. Action: Try positioning the DDU externally as high as possible. Spotwave Wireless Inc.
  • Page 32 SCU and DDU it can be extended up to 60ft. While the provided power supply and wire may be cut shorter, ensure it falls within the confines described above if it must be made longer. SpotCell 100, Release 1.0...
  • Page 33 # is necessary at this point. Status: The SpotCell 100 has been installed and your cell phone coverage has not improved. Action: Check with your carrierto determine if your cell phone is a duel band PCS/Analogue phone.
  • Page 34 NFORMATION Information: Remote installation SpotCell 100 characteristics. Action: In order for the SpotCell 100 system to function, there are two basic parameters that must be met. The DDU must receive a minimum amount of cellular signal, and a physical environment that blocks cellular signals must be in between the DDU and SCU (i.e.
  • Page 35 ‘Install’ mode, the LED will not turn green. Additionally, the LED will not illuminate green if a minimum signal level is not achieved during the initial rotation. Spotwave Wireless Inc.
  • Page 36 ROUBLE HOOTING NFORMATION SpotCell 100, Release 1.0...

  • Page 37: Applications Overview

    Appendix A – Applications overview SpotCell 100 operates in the 800 MHz cellular frequency band and will be installed in a location where a cellular handset has poor or non- existent coverage. Poor coverage may be a result of signal degradation due to terrain or urban environmental influences such as buildings, tunnels or underground garages.
  • Page 38 PPLICATIONS OVERVIEW SpotCell 100 is a complete out-of-the-box solution consisting of four physical components: A donor component called a DDU (Directional Donor Unit), which is 14.00 inches (35 centimetres) wide, 10.50 inches (27 centimetres) high and 3.50 inches (9 centimetres) deep.

  • Page 39: Operation

    The adaptive algorithms employed in SpotCell 100 allow it to be a non-engineered solution – i.e., installed and operated without engineering intervention or support.
  • Page 40 The SCU is located indoors in an area requiring improved coverage. The SpotCell 100 system provides a net increase in system gain between the mobile subscriber and the base station. This gain is distributed between the active antennas located in the Donor Unit and Indoor Unit to maximize overall system performance and stability.

  • Page 41: System Specifications

    B.2 Horizontal antenna beam width: B.2.1 SCU Antenna Summary Gain 2.5 dBi Azimuth Beamwidth ±75° F/B 15 dB B.2.2 DDU Antenna Summary Gain 10 dBi Elevation Beamwidth ±32° offset -12° F/B 20 dB B.3 Architecture Tables go here SpotCell 100, Release 1.0...
  • Page 42 YSTEM PECIFICATIONS SpotCell 100, Release 1.0...

  • Page 43: Installation Safety Regarding Hazard Of Shock

    Within connected units, the units at the far ends of a row of connected buildings of the same height have a higher probability of being struck by lightning. SpotCell 100, Release 1.0...

  • Page 44: Overhead Power Lines

    Always thoroughly investigate your surroundings prior to installing masts or antennas in an outdoor location, and never attempt this without adequate lighting, as shadows and trees may obscure power lines. SpotCell 100, Release 1.0...

  • Page 45: Grounding

    20 feet. Many States/Provinces have laws outlining rules and regulations when working near power lines, and you will want to follow their standards if available. · C.3 Grounding information to be added here on grounding, next week SpotCell 100, Release 1.0...
  • Page 46 NSTALLATION AFETY EGARDING AZARD OF HOCK SpotCell 100, Release 1.0...
  • Page 47 This is the concept whereby the Adaptive Per- Breathing sonal Repeater adapts its physical coverage in order to provide the subscriber’s Personal Wireless Space only where it is needed, in order to minimize both re-radiated power and handset power. SpotCell 100, Release 1.0...
  • Page 48 RULE OF THUMB: Every time you double (or halve) the power level; you add (or subtract) 3 dB. For example, 125 mW is 21 dBm and 250 mW is 24 dBm. SpotCell 100, Release 1.0...
  • Page 49 Glossary Directional Donor This is the SpotCell 100 system element that Unit DDU is installed with a directional antenna aimed at the nearest cellular base-station. This unit may often be installed outdoors. The term donor is widely used in the repeater industry for the antenna that supports the air interface to the network.
  • Page 50 Subscriber Cov- This is the SpotCell 100 system element that erage Unit SCU is installed to provide service by creating a Personal Wireless Space for the subscriber.

Table of Contents