Advertisement
Ecostrad Eco Panel Heater Setup – Simple Guide
Before you Begin...
Ensure the heater is switched on both at the plug and at the rocker switch on the right-hand
side of the panel.
If there is a key symbol on the screen, this means that the heater is locked. Press and hold
the + and - button at the same time in order to unlock the heater.
Now press the red
Standby button.
You may see this icon which indicates that the heater is warming and using power.
Time & Day Setting
To set the time and day of the week for your Eco, press and hold
the 'PROG' button and the time will display on the screen. The
hour will be blinking to indicate it is selected for adjustment.
Change this to the current time using the +/- buttons. Press the
'PROG' button to accept. Repeat the process for the minutes.
You can now select the day, represented by the numbers 1-7 at
the top of the screen (1 = Monday, 7 = Sunday). Select the
current day by using the +/- buttons. Confirm the day by clicking
the 'PROG' button.
Programming
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Electric Radiators Direct Ecostrad Eco
- Page 1 Ecostrad Eco Panel Heater Setup – Simple Guide Before you Begin… Ensure the heater is switched on both at the plug and at the rocker switch on the right-hand side of the panel. If there is a key symbol on the screen, this means that the heater is locked. Press and hold the + and - button at the same time in order to unlock the heater.
- Page 2 After setting the time and day, you can begin to program your Eco. At the top of the screen you will be able to see 7 triangles, one for every day of the week. The programming screen always starts from Monday at 0:00hrs. Use the +/- keys to advance through the hours, from 0 –...
Need help?
Do you have a question about the Ecostrad Eco and is the answer not in the manual?
Questions and answers