Advertisement
Battery box for 6x C-cell batteries
Technical manual
4001
The 4001 battery box is used to when extra battery life is wanted.
It is always recommended with systems set to time delay.
DIMENSIONS / MOUNTING INSTRUCTION
When deciding position to fit the 4001 make sure that no moving part of boltwork will interfere
with box or cable when in use. Cable length is approximately 400mm (usable). Prepare fixing
holes and clean surfaces.
M-LOCKS BV
Tel: +31 (0)314 376 876
Vlijtstraat 40
ver. 1.0 2010 05 26
Fax: +31 (0)314 376 878
NL-7005 BN Doetinchem
1 of 2
www.m-locks.com
Advertisement
Table of Contents
Summary of Contents for M-LOCKS 4001
- Page 1 It is always recommended with systems set to time delay. DIMENSIONS / MOUNTING INSTRUCTION When deciding position to fit the 4001 make sure that no moving part of boltwork will interfere with box or cable when in use. Cable length is approximately 400mm (usable). Prepare fixing holes and clean surfaces.
- Page 2 Also do not use countersunk screws as the countersunk part can damage the “ears” on the lid and weaken them to the point where they may break off. M-LOCKS BV Tel: +31 (0)314 376 876 Vlijtstraat 40 ver.
Need help?
Do you have a question about the 4001 and is the answer not in the manual?
Questions and answers