Nebula ONE User Manual

Nebula ONE User Manual

Versatile pen-style leaf vaporizer

Advertisement

ONE
USER MANUAL
Read carefully before using the device and save these instructions.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ONE and is the answer not in the manual?

Questions and answers

Naheed Shaikh
March 22, 2025

I have set the temperature but it is not heating up

1 comments:
Mr. Anderson
March 22, 2025

Your Nebula ONE may not be heating up due to several possible reasons:

1. Cleaning Issue – The manufacturer suggested that improper cleaning can cause the chamber to stop heating. Ensure that the device is properly cleaned and maintained.
2. Battery Level – If the battery is too low (0-19%), the device may not function properly. Charge it and try again.
3. Power-On Issue – Ensure the device is fully powered on by pressing the power button five times.
4. Temperature Setting – Double-check that the temperature has been set correctly by pressing the power button twice to cycle through the temperature levels.
5. Factory Reset – Try resetting the device by holding the power button for 10 seconds while it is off to restore the factory default settings.
6. Device Malfunction – If none of the above works, the heating element may be faulty, especially if the device is out of warranty.

If the problem persists, you may need to consider a replacement.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for Nebula ONE

  • Page 1 USER MANUAL Read carefully before using the device and save these instructions.
  • Page 2: Table Of Contents

    USER MANUAL Table of Contents.............Page 1. An ntroduction to Device........2 Nebula 2. Packaging List of Components...........4 3. Getting Started...............5 4. Charging................7 5. Power Indicator...............8 6. Power On Indicator..............9 7. Setting Your Temperature............10 8. Reset..................11 9. Warranty................12 10. Company Contact Information..........13...
  • Page 3 Nebula One is a powerful yet versatile pen-style leaf vaporizer that hits The One harder than temperature settings devices much more expensive. provide you with options to enjoy your fav o rite strains just the way you like it. At the core of this powerful vaporizer is a patent...
  • Page 4: Device

    An Introduction to Your New Device Top Cap O Ring Ceramic Heating Chamber Battery LED Light Display Power Button...
  • Page 5: Packaging List Of Components

    Packaging List of Components Things included in the box are following: 1 * Cleaning Brush 1 * Packing Tool Nebula 1* USB Cable Silicone Sleeve 1 * Quick Guide 2* Stainless Steel Mesh 1 *Water 1* Extra O Ring (Mesh Number:200)
  • Page 6: Getting Started

    Getting Started Twist and pull off the top cap. Load grinded materials into the ceramic bowl. only recommend loading 0.1g-0.3g of material each time to get the best vaping experience.)
  • Page 7 Getting Started Twist and press on the top cap. Quickly press the power button 5 times to turn on Press and hold power button 2 seconds to start your session. After flashing for about 30 seconds, the LED will remain lit to indicate that is ready for use.
  • Page 8: Charging

    Charging To charge, connect to a wall adaptor via the USB cable. the One recommend to use 1 Amp wall adaptor. Note: Please disconnect from Nebula the charger once the red light shows turn when fully charged. leave charging unattended.
  • Page 9: Power Indicator

    Power Indicator While the device is on, simply press the power button once to show the battery life. Battery life remaining is displayed by the LED in the format below: 80-100% battery life 60-79% battery life 40-59% battery life 20-39% battery life Power Button 0-19% battery life...
  • Page 10: Power On Indicator

    Power On Indicator When the device is on, the red led indtcator near the USB port will remain lit. The device will automatically turn off when there is no action for 10 minutes. Power On Indtcator...
  • Page 11: Setting Your Temperature

    Setting Your Temperature Quickly press the power button 2X while the device is ON to adjust the temperature. The LED will flash below the tempera- ture markings to indicate the current temperature level. Press the power button 2X to increase to the next temperature level. You may cycle through the five temperature levels this way to reach your desired temperature setting.
  • Page 12: Reset

    Reset Reset to factory default settings: When the device is off, press and hold the power button for 10 seconds to restore the factory default settings. The LED will remain lit for 5 seconds to confirm that reset has been completed. 10 Seconds...
  • Page 13: Warranty

    This warranty does not cover any damages outside of expected normal use. Void of Warranty Any one of the following conditions will void the warranty: Failure to provide original receipt of purchase. Product failure or damage due to improper use or unauthorized repair or alteration.
  • Page 14: Company Contact Information

    Contact Information Nebula Addres Benedict Square, Peterborough, Email: sales@nebulavaporizers.com Web: .com nebulavaporizers...

Table of Contents