Nokia E52 User Manual page 96

on the display. Or, open one of the access point groups,
and select an access point marked with
Use the instructions provided by your service provider to
edit the following:
Access point name — The access point name is
•
provided by your service provider.
User name — The user name may be needed to make
•
a data connection, and is usually provided by your
service provider.
Prompt password — If you want to set the device to
•
ask for a password every time you log in to a server, or
if you do not want to save your password in the device,
select Yes.
Password — A password may be needed to make a
•
data connection and is usually provided by your service
provider.
Authentication — Select Secure
•
password encrypted or Normal to send your password
encrypted when possible.
Homepage — Depending on the access point type you
•
are setting up, enter the web address or the address of
the multimedia message centre.
Use access point — Select After confirmation
•
the device to ask for confirmation before the
connection using this access point is created, or
Automatically to set the device to connect to the
destination using this access point automatically.
Select Options Advanced settings
>
following:
96
Cyan Cyan Cyan Cyan
Network type — Select the internet protocol type to
•
transfer data to and from your device. The other
.
settings depend on the selected network type.
Phone IP address
•
of your device.
DNS addresses — Enter the IP addresses of the primary
•
and secondary DNS servers, if required by your service
provider. To obtain these addresses, contact your
internet service provider.
Proxy server address
•
server.
Proxy port number
•
proxy server.
WLAN internet access points
Select Menu Ctrl. panel
>
Destinations Access
>
to always send your
on the display. Or, open one of the access point groups,
select an access point marked with
Options > Edit.
Use the instructions provided by your service provider to
edit the following:
to set
WLAN network name
•
Search for networks. If you select an existing network,
WLAN network mode
determined by the settings of its access point device.
Network status
•
and from the
is displayed.
WLAN network mode
•
ad hoc network, and to allow devices to send and
receive data directly; a WLAN access point device is not
Magenta Magenta Magenta Magenta Yellow Yellow Yellow Yellow Black Black Black Black
(for IPv4 only) — Enter the IP address
— Enter the address of the proxy
— Enter the port number of the
Settings and Connection
> >
point, and follow the instructions
, and select
— Select Enter manually or
and WLAN security mode are
— Define whether the network name
— Select Ad-hoc to create an
www.nokia.com/support