Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for UAT ADSL USB NIC
- Page 1 EXHIBIT C User Manual...
- Page 2 Installation Guide For UAT ADSL USB Modem ADSL USB NIC User Manual Revision 1.0 01-10-2001 This document contains confidential information and is proprietary to UAT Inc. No part of this document may be reproduced in any form or by any means without the prior permission of UAT Inc.
-
Page 3: System Requirements
Installation Guide For UAT ADSL USB Modem Welcome to ADI USB ADSL Modem! Introduce yourself to the new world of fast Internet. ADI provides a whole new fast and simple plug-n-play Universal Serial Bus (USB) Windows environment for Internet access. -
Page 4: Hardware Installation
Installation Guide For UAT ADSL USB Modem Hardware Installation Familiarizing yourself with your USB ADSL Modem Your modem has one RJ-11 phone jack and USB cable jack receptacle for data connection. POTS splitters or microfilters can be required to work concurrently with conventional POTS equipment such as phone, fax and V.90 modem. -
Page 5: Driver Install
Installation Guide For UAT ADSL USB Modem Driver Install To install the drivers for Windows 98, plug the modem to system using USB cable before power up the PC or after Windows is running: 1. Windows 98 PnP detects the USB modem USB devices. Click on “Next” from below screen. - Page 6 Installation Guide For UAT ADSL USB Modem 3. Select floppy disk or CD-ROM (recommended) which contain “E:/ driver/USB/00-12-20/ cpe sw ndis sw ndis usb alpha01 for Windows 98 to install the USB firmware loader. Click on “Next” to continue. 4. Windows 98 detects the ADI USB firmware loader. Click on “Next” to continue.
- Page 7 Installation Guide For UAT ADSL USB Modem 6. Click on “Yes” to restart the PC. 7. Next is to install the ADI USB modem device driver “ADIUSBAE” into the system. Windows 98 PnP automatically detects the modem and click “Next” to continue.
- Page 8 Installation Guide For UAT ADSL USB Modem 9. Select floppy disk or CD-ROM(recommended) which contains “ADIUSBAE.SYS” “ADIUSBAE.INF” for Windows 98 to install the USB device driver. Click on “Next” to continue. 10. Follow the installation dialogs to install the driver.
- Page 9 Installation Guide For UAT ADSL USB Modem 11. Now restart the computer as the system asks. Note: Unplug the USB cable and do not plug it back until system finishes running Windows. Otherwise, unexpected crash might be occurred.
- Page 10 Installation Guide For UAT ADSL USB Modem ADIMON USB User Interface GUI Setting Up After the PC being restarted, please go to the Start Menu->Program-> Windows Explorer->[E:]->Driver->USB->00-12-20-> cpe sw ndis usb alpha01, for ADIMON USB User Interface setting up.
- Page 11 Installation Guide For UAT ADSL USB Modem Changing USB driver parameters To verify the modem is properly installed, open “Control Panel” and click on “System” icon. In the “Device Manager” window you should see the “ADI USB ADSL Modem” in the “Network adapters”...
- Page 12 Installation Guide For UAT ADSL USB Modem 3. Click on “Advanced” tab. and change desired driver parameters from the following windows: Click on “OK” and back to the Network window to change the TCP/IP Net work Settings. Changing the TCP/IP Network Settings Click on the “Network”...
- Page 13 Installation Guide For UAT ADSL USB Modem After the IP address being set, please go to Network->ADI USBADSL loader, click on “Properties” and set the same IP address as in the above procedure. Now restart the PC again as the system requires.
- Page 14 Installation Guide For UAT ADSL USB Modem PFCL1 = 0x0000000a 1: G.DMT OPTN0 = 0x00000044 OPTN2 = 0x23700000 OPTN4 = 0x111 2: T1.413 OPTN0 = 0x00000044 OPTN2 = 0x23700000 OPTN4 = 0x2 4: Default setting OPTN2 = 0x23700000 (only setting) ADSL firmware is currently defaulted to T1.413.
- Page 15 Installation Guide For UAT ADSL USB Modem After the ADSL USB modem has been successfully installed. ADIMON GUI can be opened from Start Menu ->Program->Adiusb. Double click on the “ADIMON’ icon. The first screen is the Summary Window, which shows the ADSL modem status including...
- Page 16 Installation Guide For UAT ADSL USB Modem Information Field Description Transmit Line Rate Upstream data rate negotiated by the ADSL link (Kbit/s) Receive Line Rate Downstream data rate negotiated by the ADSL link (Kbit/s) Transmit Data Rate Actual user data transmit rate (Kbit/s)
- Page 17 Installation Guide For UAT ADSL USB Modem DSL Information Description Field ADSL Standard ADSL Standard (ANSI T1.413, G.DMT, G.LITE, Multi-Standard) Transmit Rate Upstream data rate negotiated by DSL link (Kbit/s) Receive Rate Downstream data rate negotiated by DSL link (Kbit/s)
- Page 18 Installation Guide For UAT ADSL USB Modem Information Field Description The VPI and VCI values can be changed here, the values are to be entered using decimal format Encapsulation For the NDIS driver, choices include Bridge LLC SNAP, Bridge VC MUX, Route LLC SNAP or Route VC MUX.
- Page 19 Installation Guide For UAT ADSL USB Modem Uninstall the USB ADSL modem To uninstall the modem: 1. From Windows Start menu, choose Programs->Adiusb and click on “UNINST”. Click “ Yes” to confirm file deletion, UNInstallShield will remove the related files 2.
-
Page 20: Troubleshooting The Modem
Installation Guide For UAT ADSL USB Modem Troubleshooting the Modem Please read the following Q&A to help debugging the problems with your ADI ADSL USB modem. USB driver is not re-loaded after unplug and plug back the USB cable to modem. - Page 21 Installation Guide For UAT ADSL USB Modem Copyright & Regulatory Information This manual and software described in it are copyrighted with all rights reserved. This manual may not be copied, in whole or in part, without written consent. All product names are trademarks and or registered trademarks of their respective companies.
Need help?
Do you have a question about the ADSL USB NIC and is the answer not in the manual?
Questions and answers