Bell Atlantic Mobile 330D User Manual page 9

-I.
* Removing the Battery
I. Turn the power off. (If power is not off, a loss of
stored numbers and messages may occur.)
2. Push and hold down the battery release latch on the
back of the phone and slide out the battery.
Release
Latch
,---
a Using the Battery Pack
i'I
~!
* Battery Charge level
The battery charge level is shown at the top right of
the LCD screen on the phone.
* Installing the Battery
The Battery pack is keyed so it can only fit one way.
I. Align the groove in the battery pack with the rail on
the back of the phone until the battery pack rests
flush with the back of the phone.
2. Slide the battery pack forward until it clicks. This
locks the battery in place.
I
lliU
lYiJ
~~Ci]C""]
Rail
Groove
15
Charge the battery full before the initial use of the
phone.
The phone comes with a rechargeable battery pack. On
purchasing the phone, one must charge the battery full.
Keep the battery charged while not in use in order to
maximize talk time and standby time when using the
phone remotely.
Full Capacity Battery needs charging
When the battery charge level r'f~1 ItJ O
becomes low, the low battery
..LOW BAmRY
sensor will alert you In three WARNING!
ways: sounding an audible tone, '-
blinking the battery icon outline, ~
and displaying "LOW BATfERY 'f.1 [j]
WARl~ING" If the batte ry char"e LowORnERY
." WARNING
level becomes exceedingly low, Phone isluming off!
the phone will automatically ~
switch off and any function in
progress will not be saved.