Page 1
Tyros3 Installation Procedure Caution: Do not turn off the power or remove the USB flash memory during this operation. Downloading the firmware 1) Download the Zip file. 2) Extract the six files included in the Zip file. 3) Insert the USB flash memory into your computer. 4) Copy the extracted files into the root directory of the USB flash memory.
Page 2
* When the installation is completed, the following display appears with firmware version. Turn off the power switch on the instrument, and remove the USB device from the instrument. Confirming the version number 1) Turn on the power of the instrument and wait until the main display appears.