The information contained in this document does not affect or change the product specifications or warranties. Inventec Corp. is not liable for any damages resulting from the use of this product.
FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 5
SMS Settings ...................21 Chapter 4. Quitting and Uninstalling ..........23 4.1 Quitting and Removing................24 Quitting Mobile Connect ..............24 Removing the Wireless Device from your PC ......24 4.2 Uninstalling Mobile Connect..............24 Appendix..................25 A.1 Specifications ..................26 A.2 Troubleshooting ..................26...
1.1 Introduction Views of the Device LED Indicator USB Plug Slider SIM Card Slot USB Plug Notification LED The notification LED indicates the status of your device: LED Color/Status Meaning Solid green In service. Solid red The device is out of service. 1.2 Installing SIM Card A valid SIM (Subscriber Identity Module) card is required to use your wireless device.
Page 8
SIM cards can only be installed in one direction. Inserting the card in the wrong direction by force can cause damage to the card and the card slot.
2.1 System and OS Requirements To use your wireless device, the following are required for your computer: 10 MB free hard disk space or above 32MB RAM or above Screen resolution 800x600 pixels or above Color quality 16 bits or higher ...
Mobile Connect allows you to use the following features: Sending/receiving text messages and E-mails Getting connected/disconnected Using phonebook Browsing the Internet Changing system settings 3.1 Main Screen The initial screen of Mobile Connect is as follow: Functional display System button bar...
Item Description Shows the information about the network operator. Shows the network type that you are connecting to, e.g. HSDPA, UMTS, WCDMA, GPRS, EDGE … etc. Shows connected or disconnected status. Shows the volume information for the current connection. Shows the duration of an active connection. Shows the number of unread text messages in real time.
Click to check if there are any new messages. You can see the abstracts of received massages in the InBox folder. The detailed content of the massage you select is shown on the lower-half of the SMS screen. You can double-click a massage to view its detailed content as well.
Your text message is sent as one message if it contains less than 160 characters. If this number is exceeded, the message is divided into several messages and sent one by one. Replying Messages To reply to a sender directly, do as the following: Select a message and then click A Reply Message screen with the sender’s phone number automatically filled in will be shown.
Select one or more massages and click The message(s) will be removed to the Recycle folder. For deleting a message permanently, go to the Recycle folder, select the massage and click Delete. 3.3 Accessing the Internet Your wireless device allows you to access the Internet through an established 3G or GPRS connection.
3.4 Managing Your Phonebook Connect Mobile can help you to manage the entries in your SIM card. You can add, edit and delete entries in the Phonebook; moreover, you can send text massages directly from the Phonebook. Adding Entries Click Phonebook ( ) in the main screen.
Click to save the modified entry. Deleting Entries Select one or more entries to be removed from the Phonebook. Click to permanently delete the entry/entries. Searching Contacts In the Phonebook screen, click Start entering a contact’s name in the blank field, matching items will be listed. You can then double-click the desired contact to send him/her a message.
3.5 Changing Settings Internet settings By default, your wireless device searches for a network automatically when you click on Connect. However, you can make the search manually: In the main screen of Mobile Connect, click the SETTING button. A Setting screen will be shown. Select Custom Input. Enter requirement information for the setting items of APN, username and password.
Enter the PIN code according to the prompt. Then click Click in the Setting screen to save this setting. If your PIN is entered incorrectly three times, the SIM card will be blocked. If this happens, you can unlock it with the PIN Unblocking Key (PUK) obtained from your wireless service provider.
Enter the current PIN code and the new PIN code, and then enter the new code again to confirm it. Click to modify it. SMS Settings If your text message contains more than 160 characters, it is divided into several messages and sent one by one.
4.1 Quitting and Removing Quitting Mobile Connect If you wish to quit Mobile Connect, do either of the following: Click the close button in the upper right of the main screen. Right-click the Mobile Connect icon in your computer’s taskbar, and select Exit in the pop-up screen.
A.2 Troubleshooting Minerva 3107 cannot be detected by my PC. Make sure the Minerva 3107 is fully inserted into a USB port on your PC and check if the USB port is valid. I cannot establish a connection. ...
Need help?
Do you have a question about the Minerva 3107 and is the answer not in the manual?
Questions and answers