Related Manuals for NJIT Makerspace Cura
Summary of Contents for NJIT Makerspace Cura
- Page 1 Ultimaker 3 and Cura Quick Start Guide Ultimaker Cura – Import STL File Page 2 Ultimaker Cura – Prepare (Slice) a Print Page 3 Ultimaker 3 Printer – Start a Print Page 6 Ultimaker 3 Printer – Remove a Print...
- Page 2 Work Flow • Import STL to Cura • Prepare (slice) print job • Fill out NJIT Makerspace 3D Printing information card, get staff member approval • Pay for 3D printing • Start print job on Ultimaker printer • Job completion •...
- Page 3 Ultimaker 3 and Cura Quick Start Guide Revision A Ultimaker Cura – Import STL File • Export an STL file from CAD software – use “fine” settings for smooth geometry. • (Or download one from a site like Thingiverse) • Open Ultimaker Cura software.
- Page 4 Ultimaker 3 and Cura Quick Start Guide Revision A Ultimaker Cura – Prepare (Slice) a Print Use the adjustment tools to manipulate the selected part: • Move: Move part in reference to build plate (enter values for x/y coordinates, or drag triad arrows to move selected part).
- Page 5 Ultimaker 3 and Cura Quick Start Guide Revision A For general 3D printing, apply the following “Print Setup” settings: • Extruder: Ensure “Extruder 1” is selected, Material is set to “PLA”, and Print Core is set to “AA 0.4”. • Print Setup: Use the “Recommended” configuration options.
- Page 6 • Take and fill out NJIT Makerspace 3D Printing information card. • Maker Information: Fill in your first name, last name, and NJIT email address. Write clearly so the information is readable! • Print Job Start: Transcribe information directly from Cura. See following example: • File Name: “UM3_test_print”...
- Page 7 • Quickly spray a very light layer of hair spray on the glass build plate where the part will print. • Place staff approved (paid) NJIT Makerspace 3D Printing Information Card in card holder. • Insert USB Flash Drive and start your print.
- Page 8 • Clean the glass bed. Remove any excess plastic and hair spray. • Bring NJIT Makerspace 3D Printing information card to front desk to approve and document Print Job Pickup. • If Ultimaker printer maintenance or repair is necessary, or if a spool of filament...
- Page 9 Table 1: Ultimaker 3 - Self Serve Stations Maintenance - STAFF What When Material Check back of printer and ensure material is loaded. Start of Day Repeat for all printers. Build Plate Ensure material or hair spray is not accumulated on build Start of Day plate Supplies...