Table of Contents
Advertisement
Understanding the Power Save Feature
If your phone is unable to find a signal after 15
minutes of searching, a Power Save feature is
automatically activated. If your phone is active,
it periodically rechecks service availability or you
can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a
message displays on the screen. When a signal
is found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and
receiver. When it's turned on, it receives and
transmits radio frequency (RF) signals. When
you use your phone, the system handling your
call controls the power level. This power can
range from 0.006 watts to 0.2 watts in digital
mode.
Maintaining Your Phone's Peak
Performance
For the best care of your phone, only authorized
personnel should service your phone and
accessories. Faulty service may void the
warranty.
There are several simple guidelines to operating
your phone properly and maintaining safe,
satisfactory service.
•
Hold the phone with the antenna raised,
fully-extended and over your shoulder.
•
Try not to hold, bend or twist the phone's
antenna.
•
Don't use the phone if the antenna is
damaged.
•
Speak directly into the phone's receiver.
•
Avoid exposing your phone and accessories
to rain or liquid spills. If your phone does get
wet, immediately turn the power off and
remove the battery. If it is inoperable, call
Customer Care for service.
27
Advertisement
Table of Contents
