Summary of Contents for Odeca s.r.l. SW23
- Page 1 USER MANUAL WEIGHT INDICATOR MOD. SW23 USE AND INSTALLATION GUIDE Rel. 009_0.0 www.odeca.it...
-
Page 2: Technical Specifications
1. TECHNICAL SPECIFICATIONS Power supply Battery 6 Vcc – External powwr supplì 230 Vac 7.5 Vcc Max Electrical absorption -10°C ÷ +40°C Working temperature -20°C ÷ +50°C Stock temperature Display 5 digit red led (h 20 mm) 3 red led diam. 5 mm Keyboard N°... - Page 3 2 DISPLAY The digital display normally shows the weight in kg ; the error conditions are showed with these indications : _ _ _ _ _ _ Weight higher than scale capacity ( More than 9 div. ) (upper dash) _ _ _ _ _ _ (lower dash) Weight lower than zero value...
- Page 4 MENU CONST Display Description CAPAC Rated capacity in kg DIVIS Division value ( Select option from 0,001 to 50 ) RANGE Set Multirange ON or OFF ( Two fields of 3000 div. each one ) On the basis of the rated capacity, automatically will be set also the autozero value ( 10% of the rated output ), the value of the zero track and the value of the zero key ( 2% of the rated output ) If the RANGE option is set to ON, the weight range will be splitted in two fields of 3000...
- Page 5 STEADY VALUES VALUE DIVISIONS TIME DESCRIPTION 2 div. 0,6 sec. Weight always steady 1,5 div. 0,8 sec. Quick steady weight 1 div. 0,8 sec. Medium rate steady weight 1 div. 1 sec. High precision steady weight 0,5 div. 1,3 sec. Maximum precision steady weight ZERO TRACK VALUES VALUE...
- Page 6 BATTERY SETUP MENU Display Description STDBY Time in minute after that the display will be set in standby status ( If = 0 standby not active ) STATO If set to ON it means that the indicator is connected to battery so it is possible to display the status of the battery charge.
- Page 7 INTERNAL CONNECTIONS 3 4 5 6 7 8 9 10 11 1 - 2 PROGRAMMAZIONE DATI DI TARATURA JP1: 2 - 3 DEFAULT JP2: 1 - 2 DEFAULT 2 - 3 SEMPRE ON Pag. 7...
- Page 8 DICHIARAZIONE DI CONFORMITA’ Declaration of conformity Lo strumento per pesare a funzionamento non automatico The non-automatic Weighing instrument SW23 al quale si riferisce la presente dichiarazione, è conforme alla/e seguente/i norma/e o documento/i normativo/i : to which this declaration refers to, conforms with the following standard(s) or other regulations document(s) : Conformità...
Need help?
Do you have a question about the SW23 and is the answer not in the manual?
Questions and answers