Table of Contents
Advertisement
Quick Links
Rhein Tech Laboratories, Inc.
360 Herndon Parkway
Suite 1400
Herndon, VA 20170
http://www.rheintech.com
Ap p e n d ix H:
Us e r Ma n u a l
Please refer to the following pages.
Client:
Industrial Commercial Scales, LLC
Model:
ICS427 Wireless Indicator Transceiver
Standard:
FCC 15.249
FCC ID:
XL5-ICS427-01B
Report #:
2009199
Page 21 of 31
Advertisement
Table of Contents
Summary of Contents for Industrial Commercial Scales 427 Series
- Page 1 Rhein Tech Laboratories, Inc. Client: Industrial Commercial Scales, LLC 360 Herndon Parkway Model: ICS427 Wireless Indicator Transceiver Suite 1400 Standard: FCC 15.249 Herndon, VA 20170 FCC ID: XL5-ICS427-01B http://www.rheintech.com Report #: 2009199 Ap p e n d ix H: Us e r Ma n u a l Please refer to the following pages.
- Page 2 Wireless Transceiver System 427 Series Technical Manual Version 1.0 2320 AIR PARK ROAD NORTH CHARLESTON, SC 29406 Voice: 314-754-6358 / 843-278-0342 Fax: 843-329-1333 www.icscale.com sales@icscale.com...
- Page 3 Copyright Information Copyright © 2009 ICS, LLC All rights reserved. The information contained in this manual are copyrighted and all rights are reserved by ICS, LLC. ICS, LLC reserves the right to make periodic modifications of this product without obligation to notify any persons or entity of such revision.
- Page 4 FCC Notice ! Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation. ! Warning Changes or modifications not expressly approved by ICS, LLC will void the user’s authority to operate the equipment.
-
Page 5: Table Of Contents
Table of Contents Overview Product Specifications Enclosures Transceiver Connections Loadcell Transceiver Installation Indicator Transceiver Installation 9-10 Jumper Settings (Loadcell Transceiver Only) Power Requirement Unit Operation Calibration Led Indicator Lights (Anodized Enclosure only) Troubleshooting Notes 7/23/2009 Page 4... -
Page 6: Overview
Overview The ICS 427 Wireless transceiver system is designed to allow wireless connectivity from a loadcell(s) to an indicator. It eliminates the requirement for a local indicator or RS-232 modem transceiver. This is a bi-directional wireless system that is composed of two transceivers, one that is designated as the transmitter and the other designated as the receiver. -
Page 7: Product Specifications
Transceiver Specifications Transmitter (Loadcell) Source Voltage 3 – 12VDC Internal Battery Voltage 3.6VDC Internal Battery Life 100+hrs w/4 loadcells (Will accept 1-8 Loadcells. Battery life varies with qty of cells applied) AC Power Adapter Input 110VAC AC Power Adapter Output 5VDC 2A Loadcell Connection 5 Wire shielded... -
Page 8: Enclosures
Enclosures Standard Anodized Enclosure Loadcell Transceiver (Left) Indicator Transceiver (Right) Stainless Steel Nema 4 Enclosure (Optional) Loadcell Transceiver (Left) Indicator Transceiver (Right) 7/23/2009 Page 7... -
Page 9: Transceiver Connections
Transceiver Connections Stainless Steel Nema 4 Enclosure E+ - - - - - - - - - - - - - - - Excitation + S+ - - - - - - - - - - - - - - - -Signal + S- - - - - - - - - - - - - - - - -Signal –... -
Page 10: Loadcell Transceiver Installation
Loadcell Transceiver Installation (Anodized Enclosure) See fig 1.2 1. Connect the enclosed 5 pin female plug to the loadcell / Scale as follows: a. Pin 1 = Excitation + b. Pin 2 = Signal + c. Pin 3 = Signal – d. -
Page 11: Jumper Settings "Loadcell Transceiver Only
3. The power to the receiver is supplied by the excitation voltage from the indicator 4. Power the indicator up and ensure that the transmitter and receiver are communicating (the signal LED will flash rapidly when communicating). 5. Follow calibration procedures for the indicator used. 6. -
Page 12: Power Requirement
Power Requirement Loadcell Transceiver 1. Internal 3.6VDC rechargeable battery 2. 110VAC adapter Indicator Transceiver DC operational source voltage supplied from indicator’s + and – excitation connections. Unit Operation Turning Transceivers On/Off Indicator Transceiver The indicator transceiver receives its source voltage from the excitation voltage of the connected indicator. -
Page 13: Calibration
Calibration **The transceivers require no calibration, adjustment, or programming for indicator calibration.** Follow manufacturer provided calibration instructions for the connected indicator . LED Indicator Lights (For Anodized Enclosure Only) Signal Indicator Green LED – Good signal strength – LED will flash 10 times per second. -
Page 14: Troubleshooting
**To obtain optimal battery life, battery must be charged with supplied charger for a minimum of 8 hours when recharging** For further technical assistance please contact the technical support department. INDUSTRIAL COMMERCIAL SCALES (843) – 278 – 0243 EXT 107 service@icscale.com 7/23/2009... -
Page 15: Notes
Notes 7/23/2009 Page 14...