Download Print this page

Advertisement

Quick Links

STEP-BY-STEP SAUNA INSTALLATION GUIDE
Congrats on your new Good Health Sauna, we know you're going to love it. Installing your far infrared sauna is easier than
it may seem, and we're here to show you. Please read and view the step-by-step overview and installation instructions for
GHS saunas below. If you have any additional questions regarding set-up and installation, please call: 888-997-2862.
1
Choose a location to enjoy the
sauna. Place the base on the floor of
chosen location.
3
Slide in the lower part of bench.
Connect lower part of bench and
make sure all connections are secure.
© GHS 2019 • www.goodhealthsaunas.com • 888.997.2862
GOOD HEALTH SAUNAS
(GS3-E)
2
Insert back panel onto the base and have
someone hold it in place while you insert
side panel. Insert the left side window
panel. Make sure the tongs and grooves
are well inserted into one another.
Fasten the outside buckle.
4
Slide top part of bench completely and
securely into place.

Advertisement

loading

Summary of Contents for Good Health Saunas GS3-E

  • Page 1 GOOD HEALTH SAUNAS STEP-BY-STEP SAUNA INSTALLATION GUIDE (GS3-E) Congrats on your new Good Health Sauna, we know you’re going to love it. Installing your far infrared sauna is easier than it may seem, and we’re here to show you. Please read and view the step-by-step overview and installation instructions for GHS saunas below.
  • Page 2 Insert right side window panel. Once Fasten the outside buckles again, make sure tongs and grooves are on the sauna. well inserted into back panel. Insert front window panel, Fasten the outside buckles. aligning tongs and grooves. Make sure the unfinished side is on the inside, finished side on the outside.
  • Page 3 Push plugs for heater through holes around When installing control panel, locate flat the top panel and then connect plugs. connector wires and connect. When installing make sure roof is well aligned and settling into position. Insert stereo into mounting box Find the black wire from ceiling near prior to connecting wires.