1Introduction 1.1 Overview The F-M1SDI-3G-TxRx is Thor Fiber’s compact throw down for SD/HD/3G-SDI video applications that necessitate up to 3G SDI over a single fiber. Kit includes a transmitter named F-M1SDI-T and a receiver named F-M1SDI-R, which can send any SD/HD/3G-SDI signal (audio signal embedded) and provides one reverse RS485 data channel, and can be used for control in a wide variety of SDI-camera applications that is specifically designed for ease of use in any project that necessitates a compact throw down over fiber.
F-M1SDI-3G-TxRx 2 Panel Description 2.1 Front Panel LOCK VOUT Figure 2-1-1 F-M1SDI-T front panel Figure 2-1-2 F-M1SDI-R front panel Table 2-1-1 F-M1SDI-T/R front panel Interface Description Optical interface, bi-directional, ST/PC connector Optical signal loss alarm indicator, red. ON: Optical signal loss is detected at the port.
F-M1SDI-3G-TxRx Interface Description POWER 12V DC power input RS485 positive terminal RS485 RS485 negative terminal HD-SDI OUT SD/HD/3G-SDI video output 3 Technical Specifications Table3-1 Technical Specification Item Description F-M1SDI-T optical interface Wavelength(nm) Tx1310FP Tx1310FP Tx1550DFB Tx1550DFB Tx1550DFB /Rx1550 /Rx1310 /Rx1310...
Page 6
F-M1SDI-3G-TxRx Baud rate 0~115.2Kb/s Bit error ratio <10 Work mode Half-duplex Power and Consumption Power supply DC 12V range 8V~14V Power consumption 1.5W±10% Environment Requirements -30~+60℃ Working temperature ≤95%, no condensation Relative Humidity -40~85℃ Storage temperature Equipment dimension Equipment dimension 93.2mm×46.2mm×29.6mm...
Need help?
Do you have a question about the F-M1SDI-3G-TxRx and is the answer not in the manual?
Questions and answers