Table of Contents
Advertisement
Quick Links
Bluetooth Access Point
Copyright © 2003 Syntech Information Co., Ltd.
SYNTECH INFORMATION CO., LTD.
Head Office: 8F, No.210, Ta-Tung Rd., Sec.3, Hsi-Chih, Taipei Hsien, Taiwan
Tel: +886-2-8647-1166
e-mail:
support@cipherlab.com.tw
3560
User's Guide
(Apply to 8060/8360)
Ver. 1.00
Fax: +886-2-8647-1100
http://www.cipherlab.com.tw
Advertisement
Table of Contents
Summary of Contents for Syntech Information 3560
- Page 1 3560 Bluetooth Access Point User’s Guide (Apply to 8060/8360) Ver. 1.00 Copyright © 2003 Syntech Information Co., Ltd. SYNTECH INFORMATION CO., LTD. Head Office: 8F, No.210, Ta-Tung Rd., Sec.3, Hsi-Chih, Taipei Hsien, Taiwan Tel: +886-2-8647-1166 Fax: +886-2-8647-1100 e-mail: http://www.cipherlab.com.tw support@cipherlab.com.tw...
-
Page 2: Table Of Contents
INTRODUCTION ............................... 4 PACKING LIST..............................4 NAMES OF PARTS AND THEIR FUNCTIONS ....................4 INITIAL CONFIGURATION ..........................5 HOW TO CONNECT TO THE 3560 WITH DEFAULT IP.................. 5 NORMAL INSTALLATION ..........................5 TESTING ................................5 UPGRADE 3560 FIRMWARE ........................... 6 KERNEL MODE .............................. -
Page 3: Revision History
Revision History 2003/6/13 V1.00 First Release... -
Page 4: Introduction
Introduction The 3560 Access Point is a unit that contains a Bluetooth radio module and acts as a bridge between 8060/8360 and 10/100BASE-T Ethernet. Bluetooth is a short-range wireless technology operating in the 2.4 GHz band. It enables devices to have the ability to form networks and exchange information. -
Page 5: Initial Configuration
5)Terminal List How to Connect to The 3560 with Default IP Sometimes, user forgets the IP of 3560, it is possible to use the default IP to setup or read the 3560 setting again. Connect the 3560 to the LAN (no power supply yet). -
Page 6: Upgrade 3560 Firmware
Input the 3560’s IP in the dialog box, such as following: After downloading, the Configuration Indicator and the Terminal Connected Indicator on the 3560 will be turned on together. In the meantime, the program is writing to the flash ROM. -
Page 7: Specification
3560 will be turned on together. In the meantime, the program is writing to the flash ROM. Do not remove the power when the indicators are ON. If the power is broken abnormally when flash ROM is upgrading, 3560 will lose the program anymore and return Kernel mode. - Page 8 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio...
Need help?
Do you have a question about the 3560 and is the answer not in the manual?
Questions and answers