Charge - Sappywoon Hidden Camera Alarm Clock User Manual

2.2.2 Standby mode: Press "Power" button on
the remote once, the blue light keeps on; the
camera goes into standby mode. If there are no
operations, the camera will also turn off after
2min.
2.2.3 Turn off: Press "Power" button on the
remote again to turn it off.
Take note that the clock is always working until
the battery runs out, no matter the camera is
on or off.

2.3 Charge

Please charge it before the first use. It can
support 12h after fully charged. To charge, use
the USB cable to connect it to your PC or
adapter (DC 5V). When charged by an adapter,
both red and blue lights keep on. After fully
charged, the red light will turn off. It takes
about 5 hours to get a full charge.
When the power is weak, the blue light keeps
blinking for 10s and then the camera turns off.
Please notice that:
3