Advertisement
Quick Links
Operating instructions
Rotary Compass Cutter
No more cutting of circular shapes by hand! With the
Ecobra rotary compass cutter there are now no limits to
creative modelling. Wonderful perfect circles can now
be cut in a single continuous stroke.
The rotation of the sharp blades ensures you get a
precise, clean cut. The rotating motion also means that
you can create circles not only in "free-style" cut, but
also in wave or perforation cuts – something that was
previously not possible.
The creative modelling possibilities are further broad-
ened by a V-shaped blade.
A unique and excellent tool for model builders, DIY
enthusiasts, tailors and dressmakers, and all creative
people, be they hobbyists, trainees or professionals,
who have had, up till now, no choice but to take the
trouble of cutting out circles "freehand" .
The perfect circle achieved without exertion. The tool
sits easily in the hand and, for those who do a lot of cut-
ting, the ratchet head ensures that strain on the wrist,
which can easily become tired, is minimized.
Advertisement
Summary of Contents for ecobra 770660
-
Page 1: Operating Instructions
Operating instructions Rotary Compass Cutter No more cutting of circular shapes by hand! With the Ecobra rotary compass cutter there are now no limits to creative modelling. Wonderful perfect circles can now be cut in a single continuous stroke. The rotation of the sharp blades ensures you get a precise, clean cut. - Page 2 Rotary Compass Cutter Contents: 2 x “free-style cut” rotary blade 1 x “perforation cut” rotary blade 1 x “wave cut” rotary blade CAUTION: 2 x cutting blade (v-shaped blade) 2 x pencil lead very sharp blades! Suitable for cutting: paper, card, fabrics, felt, leather, vinyl, PVC, etc.
- Page 3 Rotary Compass Cutter Operating Instructions 1. Unscrew the locking screw of the adjusting slider (5), set the diameter of your choice (cm or inches), and then screw the locking screw shut again. You may bring the ratchet head (1) into whatever position best suits the cutting that you After using the rotary wish to do.
Need help?
Do you have a question about the 770660 and is the answer not in the manual?
Questions and answers