Page 1
SSI 1417-S04 PCI-Card with SSI-Out puts In struc ti on Manual...
Page 2
All pro ducts from ERMA-Elec tro nic are war ran ted against de fec ti ve ma te ri al and work mans hip for a pe ri od of two (2) ye ars from date of de li very. If it is ne ces sa ry to re turn the pro duct to ERMA, the sen der is re spon - si ble for ship ping char ges, freight, in su ran ce and pro per pa cka ging to prevent brea ka ge in tran sit.
Will be used at dan ge rous for life and health ! At ten ti on: Will cau se da ma ge. In struc tion: If not no ti ced, Trouble may oc cur. Tip: Use ful hints for bet ter ope ra ti on. ERMA-Electronic GmbH...
4. Function The SSI 1417-S04 will use one PCI- slot within the pc. Be cau se the PCI- bus sup - ports plug and play, the re are no jum pers or swit ches to change con fi gu ra ti on.
• Coils of re lays must be supp lied with fil ters. • Par al lel wi ring of in put si gnals and AC po wer li nes should be avoi ded. ERMA-Electronic GmbH...
Be cau se within PC’s and the pe ri phe rals are high vol ta - ges it is dan ge rous to life! 7.1. Hardware configuration The SSI 1417-S04 uses plug and play and so the re is no need for any set tings. ERMA-Electronic GmbH...
The DLL S1417S04_DLL.DLL in clu des all func ti ons ne cessa ry for the work with the SSI 1417-S04. The re turn va lue of all func ti ons re ports an er ror- code. A re turn va lue of SSI_ERR_OK will show suc cess ful exe cu ti on. Other wi se the code will show the type of er ror.
This func tion re turns the num ber of in stal led SSI 1417-S04 cards. S1417S04_Get Card Num be r This func tion re turns the se ri al num ber of the SSI 1417-S04 card with the de si red in dex. In dex starts with 0 for the first card!.
Page 13
The se functions will re turn the ab so lu te va lue for the cor re spon ding SSI out put 0 or 1 of the card with the de si red in dex. In dex starts with 0 for the frst card! ERMA-Electronic GmbH...
Within di rec to ry In clu de\VB6 on the cd the re is the file s1417s04_dll.bas. If this file is in clu ded within a Vi sual Basic- pro ject, all DLL func ti ons for SSI 1417-S04 are available in the pro ject.
Direct programming For use of the SSI 1417-S04 on other oper ting sy stems or to get faster re ac tion ti - mes or spe cial re ac ti ons other dri vers should be im ple men ted. The re fo re all nee - ded in for ma ti on fol lows.
That must not be a fai lu re of the board. The re are many minor de tails when a new board doesn’t work. In that case at first some points should be paid at ten ti on to. ERMA-Electronic GmbH...
• The cable of the pe ri phe rie should be te sted. If you have ob ser ved the hints abo ve and the board doesn’t work at all call the ERMA - Team. The ER MA- Team will help you. 10. Technical datas...
11. Ordering information 11. Ordering information SSI 1417/ -S04 Encoder Power Supply Without power supply With 5 V power supply With 12 V power supply With 24 V power supply Galvanic (opto) Isolation Without galvanic isolation With galvanic isolation ERMA-Electronic GmbH...
Page 20
ERMA - Elec tro nic GmbH Max-Eyth-Str. 8 D-78194 Im men din gen Te le fon (07462) 2000 0 (07462) 2000 29 email info@erma-elec tro nic.de www.erma-elec tro nic.de...
Need help?
Do you have a question about the SSI 1417-S04 and is the answer not in the manual?
Questions and answers