Page 1
The Most Advanced Portable Apple Watch Charger Compatible with Apple Watch Series 4 Apple Watch Series 3 Apple Watch Series 1 Apple Watch (1 generation) User’s Guide The “Made for the Apple Watch” designation indicates that an accessory has been designed to connect specifically to the Apple Watch, and has been certified by the developer to meet Apple performance standards.
Page 2
Technical Specifications Approved for Apple MFI Certification Battery capacity: 1400 mAh o Certified in accordance with the MSDS (Material Safety Data Sheet) Input interface: USB micro connector Input current rating: 3A maximum Features: 4 LED battery level display, charging status display ...
Basic Operation To charge the qCharge Plug in the micro USB input and charge the qCharge until all 4 LED lights are illuminated. To ensure full battery level capacity, continue charging the qCharge for an additional 20 minutes after the 4 illuminates and remains on.
0 LEDs = 0% to 2% *Note: Even if no LEDs are illuminated, the qCharge can continue to charge the Apple Watch as long as the qCharge battery level is greater than 0%. To ensure full battery level capacity, continue charging the...
Page 5
Auto shutoffs will only be activated when the qCharge is NOT connected to a USB power source. One-minute shutoff Without an Apple Watch on top of it, the qCharge will automatically shut off after one minute. Shutoff after Apple Watch is fully charged: When the Apple Watch is fully charged, the charging current will drop and trigger the one-minute shutoff.